Miele T 8822 C operating instructions Cleaning and care, Emptying the condensed water container

Page 26

Cleaning and care

Emptying the condensed water container

The condensed water will be collected in the condensed water container unless the dryer has been connected for external drainage (see "Installation").

Empty the condensed water container after every drying pro- gramme.

The Empty container indicator will light up if the maximum level of the condensed water container is reached. The indicator light will go out when the door is opened and closed again.

￿Pull out the condensed water container.

￿To prevent water running out, hold it at the front and towards the back and keep it in a horizontal position when carrying it.

￿

Empty the container.

￿

Replace the container in the dryer.

￿Condensed water should not be consumed. It could lead to health problems for people and animals.

Condensed water can be put to household use (e.g. in a steam iron or humidifier). To ensure that any residual particles of fluff in the condensed water are removed before use, pass it through a fine sieve or paper filter first.

26

Image 26
Contents Operating instructions For condenser tumble dryer T 8822 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelFollowing are also selected via the display Programme duration / Estimated time remainingDisplay shows Drying Garment care label symbolsTips on drying IroningSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerDrying level programmes Select any Extra options / Delay startSelect a programme Remove the laundry at the end of the programme Start the programmeBefore the end of a programme Extra options Extra options / Delay startDelay start Minimum iron Max. load 3.5 kg Normal, Hand iron Cottons Max. load 7 kg Extra dry, NormalHand iron, Machine iron Delicates Max. load 2.5 kg Normal, Hand ironProgramme chart Warm air Max. load 7 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 7 kg Gentle smoothing Max. load 1 kgOnce a programme has started Altering Delay startChanging the programme sequence Adding or removing laundry after a programme has startedTo deactivate the lock Electronic system lockTo activate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesTo switch off this Problem Possible cause RemedyAirways indicator To switch off this warningFlashing slowly Problem Possible cause Remedy Start/Stop button isProgramme indicator Display is darkAn unsatisfactory drying result Even switches off Other problemsProblem Possible cause Remedy Drying process Goes on too long orPower cut Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer afterChanging the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessoriesInstallation Front viewRear view Installation siteTransporting the dryer to its installation site Replacing the lidRoom ventilation Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Washer-dryer stackArranging the drain hose External condensed water outletGeneral notes Installation conditions requiring a non-return valve External drainage via a sink or gullyFit adapter 1 to the sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Consumption data Woollens handcareTechnical data Reduced residual moisture. Laundry drier To check the settingProgrammable functions Programmable functions Anti-crease off Hour anti-crease Hours anti-crease factory default settingAnti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesOff Factory default. Not in current pro- grammeStandby Follow the steps ,, ... to pro- gramme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Page Alteration rights reserved/0113 Nr 847 520
Related manuals
Manual 56 pages 37.44 Kb