Inspection and repairs

ENGLISH

•Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

•Do not use the appliance if any part is damaged or defective.

•Have any damaged or defective parts repaired or replaced by an authorised repair agent.

•Before use, check the power supply cord for signs of damage, ageing and wear.

•Do not use the appliance if the power supply cord or mains plug is damaged or defective.

•If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

•Never attempt to remove or replace any parts other than those speciﬁed in this manual.

•Do not attempt to repair the appliance. Take it to your nearest Black & Decker-owned or authorised Service Centre for repair.

Electrical safety

This product must be earthed. Always check that the power supply corresponds to the voltage on the

rating plate.

•Power plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (Class1) appliances. Unmodiﬁed plugs and matching outlets will reduce the risk of electric shock.

Extension cables & Class 1 product

•A 3-core cable must be used as your appliance is earthed and of Class 1 construction.

•Up to 30m (100ft) can be used without loss of power.

To avoid the risk of electric shock, do not immerse the cord, plug or appliance in water or other liquid.

•If the supply cord is damaged, it must be replaced by the manufacturer or an authorized Black & Decker Service Center in order to avoid a hazard.

Additional safety instructions for irons

•Always route the cord carefully to avoid a tripping hazard.

•Do not use the appliance near water.

•Do not place the appliance near heat sources or directly under cabinets. Do not use the appliance in the presence of explosive or ﬂammable materials.

•The ﬁlling aperture must not be opened during use.

•Surfaces may be hot during use and during the cool down period.

•Set the temperature control dial to the min position before plugging in or out.

•Let the appliance cool down before leaving it unattended and before cleaning or inspecting any parts of the appliance.

•The power supply cord should not touch the hot soleplate during use or during the cool down period.