AEG 72630 Starting the washing program, Washing Program Progress, If the delay timer has been set

Page 22

Operating Instructions

Starting the washing program

0 1. Check that the water tap is open.

2. Start the washing program: Press the START/PAUSE button

The washing program is started or starts at the end of the time delay set.

3	If the DOOR display flashes red when the START/PAUSE button is
	pressed, the door is not properly closed.

– The display DOOR flashes red

– The error code E40 then flashes in the multi display

– And the MAIN WASH display flashes.

In this case, press the door firmly closed and again press the START / PAUSE button.

If the delay timer has been set:

The start time delay set on the time delay counts down; the time remaining until the program starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer.

• Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again.

• Changing or stopping delay timer: Press the DELAY TIMER button repeatedly until the desired time is displayed. When the program duration is displayed (display in minutes e. g.129) the washing program starts without delay.

Washing Program Progress

Program progress display

Prior to the start, the program steps chosen are displayed by the Program progress display. During the washing program the current program step is displayed.

Multi-display

The expected time remaining (in minutes) to the end of the program is displayed in the multi display.

22

Image 22

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Contents Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Program selectorWoollens P hand wash Program option buttons What does Update mean? Consumption data and wash timesPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing program has endedBrief instructions Changing the spin speed / Selecting Rinse Hold Setting the Washing ProgramAdjusted to suit the washing program Possible program options to suit the type of washingSetting the delay timer / soaking duration Delay timer Soaking durationLoading the washing Opening and closing the doorSee Program Tables for maximum loads Compartment for in-wash stain treatment If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentWashing Program Progress If the delay timer has been setStarting the washing program Program progress displaySelecting the program options Change the washing programChanging or stopping the wash program Changing the Spin SpeedWashing cycle is complete/Removing the washing Electricity mainsProgram tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorTrouble Shooting What to do ifMachine is not level Pay attention to the maxi Washing heavily If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingPull it out Before cleaning the drain pump Cleaning the drain pumpWhen the water is completely drained Out emergency emptyingUnlocking of the door in an emergency Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Setting the child safety feature Child Safety FeatureCancelling the child safety feature Installation and Connection Instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty Conditions Great BritainIndex Help us to help you Service & Spare Parts0870 5 929 PNC