AEG 72630 Cleaning the drain pump, When the water is completely drained, Out emergency emptying

Page 34

Operating Instructions

When the water is completely drained:

6.Push the plug securely into the emergency emptying hose and turn it clockwise to secure it.

7.Replace the emergency emptying hose in its holder.

8.Put on the flap and close.

Cleaning the drain pump

1

Warning! Switch off the washing machine and pull out the mains plug

 

before cleaning the drain pump.

0 1.

First carry out emergency emptying (see the previous section "Carrying

 

out emergency emptying“).

2.Place a towel on the floor in front of the cover of the drain pump. Sur- plus water may flow out.

3. Unscrew the drain pump cover anti- clockwise and pull it out.

4. Remove any foreign bodies from the pump housing.

5. Replace the cover. Insert the webs on the cover laterally into the guide slots and screw on the cover securely clock- wise.

6. Close the emergency emptying hose and place it in the holder.

7. Close the flap.

34

Image 34
Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Contents Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Program selectorWoollens P hand wash Program option buttons What does Update mean? Consumption data and wash timesPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing program has endedBrief instructions Changing the spin speed / Selecting Rinse Hold Setting the Washing ProgramAdjusted to suit the washing program Possible program options to suit the type of washingSetting the delay timer / soaking duration Delay timer Soaking durationLoading the washing Opening and closing the doorSee Program Tables for maximum loads Compartment for in-wash stain treatment If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentWashing Program Progress If the delay timer has been setStarting the washing program Program progress displaySelecting the program options Change the washing programChanging or stopping the wash program Changing the Spin SpeedWashing cycle is complete/Removing the washing Electricity mainsProgram tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorTrouble Shooting What to do ifMachine is not level Pay attention to the maxi Washing heavily If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingPull it out Before cleaning the drain pump Cleaning the drain pumpWhen the water is completely drained Out emergency emptyingUnlocking of the door in an emergency Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Setting the child safety feature Child Safety FeatureCancelling the child safety feature Installation and Connection Instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty Conditions Great BritainIndex Help us to help you Service & Spare Parts0870 5 929 PNC