AEG 72630 manual What to do if, Trouble Shooting

Page 29

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code E10, E20 or E40 is shown in the multi-display, you may be able to remedy the fault yourself (see the Faults table below) .

After clearing the fault, press the START/ PAUSE button. If the fault code is displayed again, contact your local AEG Service Force Centre.

•For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code.

	Problem	Possible Cause	Remedy
		The mains plug is not	Plug in the mains plug.
		plugged in.	Plug in the mains plug.
		plugged in.
		The house fuse has blown.	Replace the fuse.
	The washing machine	The door is not correctly	Close the door; The lock must
	does not work.	The door is not correctly	Close the door; The lock must
	does not work.	closed.	engage audibly.
		closed.	engage audibly.
		START/PAUSE button not	Keep the START/PAUSE but-
		START/PAUSE button not	ton pressed until the pro-
		pressed long enough.	ton pressed until the pro-
		pressed long enough.	gram begins.
			gram begins.

			Cancel the child safety fea-
	Door cannot be closed.	The child safety feature is set	ture (see Section "Child
			Safety Feature“).
	The fault code E40	The door is not correctly	Close the door correctly.
	appears. The display	The door is not correctly	Close the door correctly.
	appears. The display	closed.	Start the program again.
	MAIN WASH flashes.	closed.	Start the program again.
	MAIN WASH flashes.

	No water flows.	Water tap is closed.	Open the water tap.
	No water flows.		Close the water tap. Unscrew
	Fault code E10		Close the water tap. Unscrew
	appears. The display	Filter in screw connection of	the hose from the tap,
	appears. The display	the inlet hose is blocked.	remove the filter and clean
	RINSE + flashes	the inlet hose is blocked.	remove the filter and clean
	RINSE + flashes		under running water
			under running water

29

Image 29

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Contents Intended Use SafetyPrior to initial start-up General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDetergent dispenser drawer Description of the ApplianceFront view Program selector Control panelWoollens P hand wash Program option buttons Consumption data and wash times What does Update mean?Sorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions When the washing program has endedRunning a washing cycle Adjusted to suit the washing program Setting the Washing ProgramChanging the spin speed / Selecting Rinse Hold Possible program options to suit the type of washingSoaking duration Setting the delay timer / soaking duration Delay timerSee Program Tables for maximum loads Opening and closing the doorLoading the washing Add detergent / conditioner If using liquid detergent / tabletsCompartment for in-wash stain treatment Compartment for pre-wash/soaking detergentStarting the washing program If the delay timer has been setWashing Program Progress Program progress displayChanging or stopping the wash program Change the washing programSelecting the program options Changing the Spin SpeedElectricity mains Washing cycle is complete/Removing the washingWashing Program tablesSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorWhat to do if Trouble ShootingMachine is not level Pay attention to the maxi Washing heavily If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingPull it out Carrying out an emergency emptyingHave a flat container on hand to catch the water When the water is completely drained Cleaning the drain pumpBefore cleaning the drain pump Out emergency emptyingCancelling the additional rinse function Setting the additional rinse functionUnlocking of the door in an emergency Additional Rinse RINSE+Cancelling the child safety feature Child Safety FeatureSetting the child safety feature Installation Safety Precautions Installation and Connection InstructionsRemove transport packaging Installation of the applianceTransporting the appliance Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelEarth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Great Britain Warranty ConditionsIndex 0870 5 929 Service & Spare PartsHelp us to help you PNC