AEG 72630 manual Pay attention to the maxi Washing heavily

		Operating Instructions
Problem	Possible Cause	Remedy
		Pay attention to the maxi-
Washing heavily	Probably too much washing	mum load quantity (see Pro-
		gram tables). In the case of
creased	put in the drum.
		easy-care fabrics, select the
		EASY IRON program.
	Drain hose is kinked.	Remove the kink.
The washing is not suf-		Contact your local Service
	Maximum pump head (dis-	Force Centre. For pumping
ficiently spun. Water is
	charge height 1m from the	heights over 1m a conver-
left in the drum.
	appliance's base) is exceeded.	sion kit is available as a spe-
The fault code E20
		cial accessory.
appears . The RINSE
display flashes.		Switch off the appliance and
	Drain pump is blocked.	pull out the mains plug.
		Clean the drain pump.
		Wait until the DOOR display
		lights up green.
		If it is still necessary to open
The door cannot be	The door is locked due to a	the door:
opened when the	high water level or a high	turn the program selector to
appliance is switched	temperature. (the DOOR dis-	OFF turn the program selec-
on.	play is off).	tor to PUMP OUT. Press the
		START/PAUSE button
		After the water has been
		pumped out, the door can be
		opened.
	Water tap is not fully	Open the water tap fully.
Remnants of detergent	opened.
are building up in the	The inlet hose filter in the	Close the water tap. Unscrew
detergent dispenser
		the inlet hose from the water
drawer.	coupling inlet hose at the
		tap and from the appliance.
	tap is blocked.
		Clean the filter.
The rinsing water is	The cause is probably a	No negative effect on the
	detergent with a high silicate	rinsing results, use a liquid
cloudy.
	content.	detergent if necessary.
When pressing a pro-	The selected program option
gram option button
	cannot be combined with the	Make another selection.
the corresponding dis-
	set program.
play does not light up.

31