AEG 72630 manual Water Drainage

Page 46

Installation and connection instructions

Water Drainage

The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring there is an air break between the drain hose and standpipe.

Important! It is essential to lay the drainage hose without kinks.

When discharging into a stand- pipe ensure that the top of the curve in the hose end is no more than 90 cm (35.4’’) and no less than 60 cm (23.6’’) above floor level.

The upright standpipe should have a minimum, length of

30 cm (12’’) from the bottom of the elbow to the top of the pipe (see diagram). Make sure that it is designed in such a way that the end of the drain hose cannot be covered with water.

Longer drain hoses are available in lengths of 2.7 and 4 metres from your AEG Service Force Centre.

46

Image 46

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Contents Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Program selectorWoollens P hand wash Program option buttons What does Update mean? Consumption data and wash timesPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing program has endedBrief instructions Changing the spin speed / Selecting Rinse Hold Setting the Washing ProgramAdjusted to suit the washing program Possible program options to suit the type of washingSetting the delay timer / soaking duration Delay timer Soaking durationLoading the washing Opening and closing the doorSee Program Tables for maximum loads Compartment for in-wash stain treatment If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentWashing Program Progress If the delay timer has been setStarting the washing program Program progress displaySelecting the program options Change the washing programChanging or stopping the wash program Changing the Spin SpeedWashing cycle is complete/Removing the washing Electricity mainsProgram tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorTrouble Shooting What to do ifMachine is not level Pay attention to the maxi Washing heavily If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingPull it out Before cleaning the drain pump Cleaning the drain pumpWhen the water is completely drained Out emergency emptyingUnlocking of the door in an emergency Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Setting the child safety feature Child Safety FeatureCancelling the child safety feature Installation and Connection Instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty Conditions Great BritainIndex Help us to help you Service & Spare Parts0870 5 929 PNC