AEG 72630 manual Inlet Hose Connection

Page 45

Installation and connection instructions

Inlet Hose Connection

A pressure hose of 1.35m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections is permissible, available from AEG Service Force Centres.

–Hose sets in lengths of 2.2m, 3.5m, and 5m are available for washing machines without Aqua-Control.

–Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash- ing machines with Aqua-Control.

Important! Never cut into pieces in order to extend the hoses!

3	Sealing rings are supplied either in the plastic
	nuts of the hose screw connection or in the

enclosed pack. Do not use other seals!

0 1. Connect the hose with the angled connection to the machine.

Important!

– Do not lay the inlet hose verti- cally downwards, instead run it to the right or left as shown in the diagram.

– Only tighten the hose screw connection by hand.

2. Connect the hose with the straight connection to a water tap with a screw thread R 3/4 (inches) Important! Only tighten the screw connection by hand.

3. By slowly opening the water tap before putting the washing machine into operation, check that the connection is free of leaks.

45

Image 45

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Contents Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Program selector Control panelWoollens P hand wash Program option buttons Consumption data and wash times What does Update mean?Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing program has ended Running a washing cycleBrief instructions Adjusted to suit the washing program Setting the Washing ProgramChanging the spin speed / Selecting Rinse Hold Possible program options to suit the type of washingSoaking duration Setting the delay timer / soaking duration Delay timerOpening and closing the door Loading the washingSee Program Tables for maximum loads Add detergent / conditioner If using liquid detergent / tabletsCompartment for in-wash stain treatment Compartment for pre-wash/soaking detergentStarting the washing program If the delay timer has been setWashing Program Progress Program progress displayChanging or stopping the wash program Change the washing programSelecting the program options Changing the Spin SpeedElectricity mains Washing cycle is complete/Removing the washingWashing Program tablesSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorWhat to do if Trouble ShootingMachine is not level Pay attention to the maxi Washing heavily If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterPull it out When the water is completely drained Cleaning the drain pumpBefore cleaning the drain pump Out emergency emptyingCancelling the additional rinse function Setting the additional rinse functionUnlocking of the door in an emergency Additional Rinse RINSE+Child Safety Feature Setting the child safety featureCancelling the child safety feature Installation Safety Precautions Installation and Connection InstructionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelElectrical Connection Measures not be observedEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Warranty ConditionsIndex 0870 5 929 Service & Spare PartsHelp us to help you PNC