AEG 72630 manual Installation-Site preparation, Installation on a Suspended Floor

Page 40

Installation and connection instructions

Installation-Site preparation

•The installation surface must be clean, dry and level. Do not install on a deep pile carpet.

•Minor unevenness of the floor surface should never be levelled out by laying pieces of wood, card or similar materials, but should always be compensated for by adjusting the screw feet.

•If the appliance is installed next to a heat source (e.g. cooking appli- ance), a heat insulating pad (87 x 57 cm) must be placed between the appliance and the heat source.

•Do not install the appliance in locations where the temperature may fall below freezing.

•Please ensure that when the appliance is installed it is easily accessi- ble for the engineer in the event of a breakdown.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least

2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

40

Image 40

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Contents Prior to initial start-up SafetyIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Program selectorWoollens P hand wash Program option buttons What does Update mean? Consumption data and wash timesPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing program has endedBrief instructions Setting the Washing Program Adjusted to suit the washing programChanging the spin speed / Selecting Rinse Hold Possible program options to suit the type of washingSetting the delay timer / soaking duration Delay timer Soaking durationLoading the washing Opening and closing the doorSee Program Tables for maximum loads If using liquid detergent / tablets Add detergent / conditionerCompartment for in-wash stain treatment Compartment for pre-wash/soaking detergentIf the delay timer has been set Starting the washing programWashing Program Progress Program progress displayChange the washing program Changing or stopping the wash programSelecting the program options Changing the Spin SpeedWashing cycle is complete/Removing the washing Electricity mainsProgram tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorTrouble Shooting What to do ifMachine is not level Pay attention to the maxi Washing heavily If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingPull it out Cleaning the drain pump When the water is completely drainedBefore cleaning the drain pump Out emergency emptyingSetting the additional rinse function Cancelling the additional rinse functionUnlocking of the door in an emergency Additional Rinse RINSE+Setting the child safety feature Child Safety FeatureCancelling the child safety feature Installation and Connection Instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty Conditions Great BritainIndex Service & Spare Parts 0870 5 929Help us to help you PNC