AEG 72630 manual Installation and Connection Instructions, Installation Safety Precautions

Page 37

Installation and connection instructions

INSTALLATION AND CONNECTION INSTRUCTIONS

Installation Safety Precautions

•When moving do not tilt the washing machine onto its front or onto its right hand side (viewed from the front). This is to prevent the pos- sibility of the electronic components becoming wet.

•Before installation inspect the machine for transport damage. Do not connect the appliance if it is damaged - contact your retailer.

•Ensure all packaging and transit bolts/bars have been removed, see „Removal of Transit Packaging“. Failure to remove transit bolts/bars may cause serious damage to the appliance or property.

•Always insert the plug into a correctly installed earthed socket.

•Any plumbing work required to install this appliance should be carried out by a plumber or competent person.

•Check that the electricity supply is the same as that indicated on the appliance´s rating plate.

•Any electrical work required to install this appliance should be carried out by an electrician or competent person.

37

Image 37

Contents ÖKO-LAVAMAT 72630 update Dear Customer Contents Installation and connection instructions Contents Prior to initial start-up SafetyIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Program selector Control panelWoollens P hand wash Program option buttons Consumption data and wash times What does Update mean?Preparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing program has endedBrief instructions Adjusted to suit the washing program Setting the Washing ProgramChanging the spin speed / Selecting Rinse Hold Possible program options to suit the type of washingSoaking duration Setting the delay timer / soaking duration Delay timerLoading the washing Opening and closing the doorSee Program Tables for maximum loads Add detergent / conditioner If using liquid detergent / tabletsCompartment for in-wash stain treatment Compartment for pre-wash/soaking detergentStarting the washing program If the delay timer has been setWashing Program Progress Program progress displayChanging or stopping the wash program Change the washing programSelecting the program options Changing the Spin SpeedElectricity mains Washing cycle is complete/Removing the washingWashing Program tablesSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorWhat to do if Trouble ShootingMachine is not level Pay attention to the maxi Washing heavily If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingPull it out When the water is completely drained Cleaning the drain pumpBefore cleaning the drain pump Out emergency emptyingCancelling the additional rinse function Setting the additional rinse functionUnlocking of the door in an emergency Additional Rinse RINSE+Setting the child safety feature Child Safety FeatureCancelling the child safety feature Installation Safety Precautions Installation and Connection InstructionsTransporting the appliance Installation of the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Warranty ConditionsIndex 0870 5 929 Service & Spare PartsHelp us to help you PNC