EXTRA RINSE BUTTON 7
Press button 7 to add rinsing phases to a programme.
Use this function for persons allergic to detergents and in areas where the wa- ter is soft.
STAIN BUTTON 8
Press button 8 to add the stain phase to a programme.
Use this function for laundry with hard stains to remove.
When you set this function, put the stain remover into compartment 
.
This function increases the pro- gramme duration.
This function is not available with a temperature lower than 40° C.
SPIN BUTTON 9
Press this button to:
•Decrease the maximum speed of the spin phase when you set a pro- gramme.
The display shows only the spin speeds available with the set programme.
•Deactivate the spin phase.
•Activate the 'Rinse Hold' function. Set this function to prevent fabric creases. The appliance does not drain the water when the programme is completed.
Spin phase is off.
'Rinse Hold' function is on.
TEMPERATURE BUTTON 10
Press button 10 to change the default temperature.
-- = cold water
ENGLISH 11
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
•You activate the appliance.
•You deactivate the appliance.
•You press the buttons.
•The programme is completed.
•The appliance has a malfunction. To deactivate/activate the acoustic signals, press button 8 and button 7 at the same time for 6 seconds.
If you deactivate the acoustic signals, they continue operate only when you press the buttons and when a malfunction occurs.
CHILD LOCK FUNCTION
This function prevents children to play with the control panel.
•To activate the function, press button 10 and button 9 at the same time
until the display shows the symbol 
.
•To deactivate the function, press but- ton 10 and button 9 at the same
time until the symbol 
goes off. You can activate the function:
•Before you press the Start/Pause but- ton 4 : the appliance cannot start.
•After you press the Start/Pause but- ton 4 , all the buttons and the pro- gramme knob are deactivated.
PERMANENT EXTRA RINSE FUNCTION
With this function you can keep the ex- tra rinse function permanently on when you set a new programme.
•To activate the function press button 6 and button 5 at the same time
until the indicator of button 7 is on.
•To deactivate the function press but- ton 6 and button 5 at the same time until the indicator of button 7 is off.