AEG L 75270 FL, L 75670 FL, L 75470 FL user manual Pull out the plastic spacers

Page 31

ENGLISH 31

6.Put the front piece on the floor be- hind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to dam- age the hoses.

7.Remove the polystyrene protection from the bottom.

8.Pull up the appliance in vertical po- sition.

9.Remove the power supply cable and the drain hose from the hose holders.

10.Remove the three bolts. Use the key supplied with the appliance.

11.Pull out the plastic spacers.

Image 31

Contents FL L 75470 FL L 75670 FL Service ContentsFor Perfect Results Accessories and ConsumablesVisit OUR Website for Care and Cleaning Safety InformationChild Safety Device General SafetyDiscard the Appliance Water connectionInterest of the Environment Environment ConcernsPackaging Materials Ecological HintsIPX4 Technical InformationProduct Description AccessoriesDisplay Control PanelON/OFF Button Programme KnobTime Save Button Delay Start ButtonStain Button Temperature ButtonAcoustic Signals Function Extra Rinse ButtonProgrammes Extra RINSE4 Programme Energy consumption Water consump Consumption ValuesBefore First USE Using the ApplianceLoading the Laundry Check the position of the flap Filling the Detergent and AdditivesCancel a Programme Setting and Starting a ProgrammeInterrupt a Programme Change a Function SET the Delay StartCancel the Delay Start AT the END of the ProgrammeEnglish Detergents and Additives Helpful Hints and TipsLaundry Load Stubborn StainsWater hardness Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Valve Filter Inlet Hose FilterEmergency Drain Frost Precautions Problem Possible cause Possible solution Troubleshooting Delay start is set Problem Possible cause Possible solution Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Installation on a not hard floorWater Drainage Water-stop deviceEnglish 132939750-A-112011