AEG L 75670 FL, L 75270 FL, L 75470 FL user manual Installation, Unpacking

Page 30

30

INSTALLATION

UNPACKING

1. Use the gloves. Remove the exter- nal film. If necessary, use a cutter.

2. Remove the cardboard top.

3. Remove the polystyrene packaging materials.

4. Remove the internal film.

5. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum.

Image 30

Contents FL L 75470 FL L 75670 FL Contents ServiceAccessories and Consumables For Perfect ResultsVisit OUR Website for General Safety Safety InformationChild Safety Device Care and CleaningWater connection Discard the ApplianceEcological Hints Environment ConcernsPackaging Materials Interest of the EnvironmentTechnical Information IPX4Accessories Product DescriptionProgramme Knob Control PanelON/OFF Button DisplayDelay Start Button Time Save ButtonExtra Rinse Button Temperature ButtonAcoustic Signals Function Stain ButtonProgrammes Extra RINSE4 Consumption Values Programme Energy consumption Water consumpUsing the Appliance Before First USELoading the Laundry Filling the Detergent and Additives Check the position of the flapSetting and Starting a Programme Cancel a ProgrammeInterrupt a Programme AT the END of the Programme SET the Delay StartCancel the Delay Start Change a FunctionEnglish Stubborn Stains Helpful Hints and TipsLaundry Load Detergents and AdditivesWater hardness Mmol/l Clarke Care and Cleaning Detergent Dispenser Drain PumpPage Inlet Hose Filter Valve FilterEmergency Drain Frost Precautions Troubleshooting Problem Possible cause Possible solutionDelay start is set Problem Possible cause Possible solution Installation UnpackingPull out the plastic spacers Positioning and Levelling Installation on a not hard floor Inlet HoseWater-stop device Water DrainageEnglish 132939750-A-112011