34
Water-stop device
A
The inlet hose has a water stop device. This device prevents water leaks in the hose because of its natural ageing. The red sector in the window «A» shows this fault .
If this occur, close the water tap and contact the service centre to replace the hose.
WATER DRAINAGE
There are different procedures to con- nect the drain hose:
With the plastic hose guide.
• On the edge of a sink.
• Make sure that the plastic guide can- not move when the appliance drains. Attach the guide to the water tap or the wall.
• To a stand pipe with
Refer to the illustration. Directly into a drain pipe at a height of not less than 60 cm (23.6”) and not more than 100 cm (39.3”). The end of the drain hose must always be ventilated , i.e. the inner diameter of the drainpipe (min. 38 mm — min. 1.5”) must be larger than the external diameter of the drain hose.