AEG L 75470 FL Setting and Starting a Programme, Interrupt a Programme, Cancel a Programme

Page 17

5.Measure out the detergent and the fabric conditioner.

6.Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer.

ENGLISH 17

3.To use powder detergent, turn the flap up.

4.To use liquid detergent, turn the flap down.

With the flap in the position

DOWN:

Do not use gelatinous or thick liquid detergents.

Do not put more liquid deter- gent than the limit showed in the flap.

Do not set the prewash phase.

Do not set the delay start function.

SETTING AND STARTING A PROGRAMME

1.Turn the programme knob. The re- lated programme indicator comes on.

2.The indicator of button 4 flashes with red colour.

3.The display shows the default tem- perature and spin speed. To change the temperature and/or the spin speed, press the related but- tons.

4.Set the available functions. The in- dicator of the set function comes on or the display shows the related symbol.

5.Press button 4 to start the pro- gramme. The indicator of button 4 is on.

INTERRUPT A PROGRAMME

1.Press button 4 . The indicator flashes.

2.Press button 4 again. The wash- ing programme continues.

CANCEL A PROGRAMME

1.Press button 1 to cancel the pro- gramme and to deactivate the ap- pliance.

2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.

The appliance does not drain the water.

Image 17
Contents FL L 75470 FL L 75670 FL Service ContentsVisit OUR Website for Accessories and ConsumablesFor Perfect Results Child Safety Device Safety InformationGeneral Safety Care and CleaningDiscard the Appliance Water connectionPackaging Materials Environment ConcernsEcological Hints Interest of the EnvironmentIPX4 Technical InformationProduct Description AccessoriesON/OFF Button Control PanelProgramme Knob DisplayTime Save Button Delay Start ButtonAcoustic Signals Function Temperature ButtonExtra Rinse Button Stain ButtonProgrammes Extra RINSE4 Programme Energy consumption Water consump Consumption ValuesLoading the Laundry Using the ApplianceBefore First USE Check the position of the flap Filling the Detergent and AdditivesInterrupt a Programme Setting and Starting a ProgrammeCancel a Programme Cancel the Delay Start SET the Delay StartAT the END of the Programme Change a FunctionEnglish Laundry Load Helpful Hints and TipsStubborn Stains Detergents and AdditivesWater hardness Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserPage Emergency Drain Inlet Hose FilterValve Filter Frost Precautions Problem Possible cause Possible solution TroubleshootingDelay start is set Problem Possible cause Possible solution Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Installation on a not hard floorWater Drainage Water-stop deviceEnglish 132939750-A-112011