AEG L 75470 FL, L 75670 FL, L 75270 FL user manual Positioning and Levelling

Page 32

32

12. Replace the plastic spacers with the plastic caps. You can find these caps in the user manual bag.

WARNING!

Remove all the packaging and the transit bolts before you in- stall the appliance.

We recommend that you keep the packaging and the transit bolts for when you move the ap- pliance.

POSITIONING AND LEVELLING

x4

• Install the appliance on a flat hard floor.

• Make sure that carpets do not stop the air circulation below the appli- ance.

• Make sure that the appliance does not touch the wall or other units

• Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibra- tion, noise and the movement of the appliance when in operation.

• The appliance must be level and sta- ble.

CAUTION!

Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the lev- el.

Make sure that there is sufficient access after the installation for possible repairs by a qualified person.

Image 32

Contents FL L 75470 FL L 75670 FL Contents ServiceVisit OUR Website for Accessories and ConsumablesFor Perfect Results Safety Information Child Safety DeviceGeneral Safety Care and CleaningWater connection Discard the ApplianceEnvironment Concerns Packaging MaterialsEcological Hints Interest of the EnvironmentTechnical Information IPX4Accessories Product DescriptionControl Panel ON/OFF ButtonProgramme Knob DisplayDelay Start Button Time Save ButtonTemperature Button Acoustic Signals FunctionExtra Rinse Button Stain ButtonProgrammes Extra RINSE4 Consumption Values Programme Energy consumption Water consumpLoading the Laundry Using the ApplianceBefore First USE Filling the Detergent and Additives Check the position of the flapInterrupt a Programme Setting and Starting a ProgrammeCancel a Programme SET the Delay Start Cancel the Delay StartAT the END of the Programme Change a FunctionEnglish Helpful Hints and Tips Laundry LoadStubborn Stains Detergents and AdditivesWater hardness Mmol/l Clarke Care and Cleaning Detergent Dispenser Drain PumpPage Emergency Drain Inlet Hose FilterValve Filter Frost Precautions Troubleshooting Problem Possible cause Possible solutionDelay start is set Problem Possible cause Possible solution Installation UnpackingPull out the plastic spacers Positioning and Levelling Installation on a not hard floor Inlet HoseWater-stop device Water DrainageEnglish 132939750-A-112011