AEG 86810 manual Memory Store program, Memory 1, 2, Setting the Memory, Changing the Memory

Page 21

Memory 1, 2, 3

Programme combinations can be stored at programme knob positions MEMORY 1, 2, 3 and can then be selected using the programme knob. To do this the desired programme combination is first put together and then stored.

Setting the Memory

Example: Programme posi- tion MEMORY 1 is to be giv- en the following programme combination: LINEN/EASY CARES 40 °C, 800 rpm, with

PREWASH.

1.Turn the programme knob to

LINEN/EASY CARES.

	LINEN/EASY CARE									12.45
	Cycle end at									14.37
	40C 800			aýýýýýVýaýaýaýaýaýaýaýa

	TEMP.			RPM OPTIONS OK						TIME

2.Press the TEMP. key repeatedly, until 40 °C appears in the display.

3.Press the RPM key repeatedly, until 800 appears in the display.

4.Using the OPTIONS key set PREWASH and press the OK key. A black bar appears under the PREWASH symbol .

5.Press the OPTIONS key repeatedly, until the SETUP symbol flashes.

6.Press the OK key. The display changes to the Special Func- tions level. Programme memory position MEMORY 1 is offered first.

3To change to another memo- ry position, press the OP- TIONS key.

Memory 1

Store program

aýýýýýaýaýaýaýBýaýaýaýa

	TEMP.		RPM		OPTIONS		OK		TIME

7.Press the OK key.

The programme combination is now stored to programme knob posi- tion MEMORY 1 and in the future can be selected directly using the programme knob.

3The Memory can be overwritten at any time with a new programme combination (see “Changing the Memory”), but cannot be deleted.

Changing the Memory

1.Put together the new programme combination as required (for an ex- ample, see “Setting the Memory”, steps 1 to 4).

2.Press the OPTIONS key repeatedly, until the SETUP symbol flashes.

3.Press the OK key.

21

Image 21

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsPrior to using the appliance for the first time SafetyChild safety General safetyResulting overheating may constitute a fire hazard Cycle end at What is shown in the displayEasy Iron Program overviewUse/Features Care Symbols1 N g u a g e Prior to using for the first timeR a c h e Programmende umPreparing and sorting washing Setting the timeCarrying out a wash programme prior to first use Preparing washingRunning a wash cycle Opening the door/Loading the washingAdding detergent/conditioner Switching on the appliance/selecting a programme If you are using liquid detergentWashing powder/tablets for the main wash cycle Changing spin speed/selecting rinse hold Speed or Rinse Hold is displayedWith spin speed 0 the TEMP. RPM Options OK Time Setup Setting optionsPrewashing To switch off the optionSensitive Prewash, Sensitive, Stain, Night CycleDelay Start Setting timesTime saving Time Saving Short or Very ShortStart in 4h Delay StartStart Press the OK key. Start in 0 min is shown in the displayStarting a programme WashingProgramme progress Interrupting a programme/Adding washingSetup Washing cycle complete/Removing the washingIf Rinse Hold or Night Cycle was selected Memory Store program Setting the MemoryMemory 1, 2 Changing the MemoryU n d N s e +Extra Rinse Set time LanguageClock Desired setting. With Child safety deviceContrast and brightness Each press of the key or ifCleaning procedure Cleaning and maintenanceDeactivating the child safety device Detergent dispenser drawerWashing drum Clean the glass in the door and the rubber collar regularlyDoor and rubber collar Top of the washing-in chamber, with a brushRemedying small malfunctions What to do ifAdjusted There are grey stains on the washing If the wash result is not satisfactoryFoam can still be seen following the final rinse There are white residues on the washingCarrying out an emergency drain When the water has all drained awayDrain pump Disposal Packaging materialOld appliance Consumption values Technical dataInstalling the appliance Safety information concerning installationTransporting the appliance This washing machine cannot be built-inRemove the power supply cable When using a sack trolley to transport the washing machineUnpacking Only use the sack trolley on the side of the appliancePage Where to install Making the appliance level Electrical ConnectionPermanent Connection Brown Live Wire coloured green and yellowPermitted water pressure Connecting to the water supplyWater inlet Open the porthole and extract the inlet hoseWater Drainage For drainage into an outlet Pumping heights of over 1 metreGreat Britain Guarantee/Customer ServiceEuropean Guarantee LU4 9QQ Slovenija Customer Care 0870 5 929For general enquiries concerning Major Appliances132 977 Subject to change without notice