AEG 86810 manual Adjusted

Page 28

Problem

Possible cause

Remedy

 

Transit packaging has

Remove transit packaging.

 

not been removed.

Washing machine vibrates

 

 

Adjust feet according to the

when operating or is noisy.

Screw feet not correctly

 

adjusted.

Installation and Connection

 

instructions.

 

 

Washing has not been

Only a few large items of

Always load the drum as full

as possible. Mix large and

spun.

washing in the drum.

small items.

 

 

 

Screw connection on the

Screw the inlet hose in firmly.

 

inlet hose is leaking.

 

 

Drain hose is leaking.

Replace drain hose.

Water is running out from

Drain pump cover is not

Close the cover properly.

under the washing

closed properly.

 

machine.

Washing was caught in

Load washing carefully for

 

 

the door.

the next wash.

 

 

 

 

Emergency drain hose is

Close off emergency drain

 

leaking.

hose properly.

Display shows: “Excess De-

Probably too much de-

Dose detergent exactly as in-

tergent”

tergent has been used.

structed by manufacturer.

 

Kink in drain hose.

Remove kink.

 

Maximum pumping

Please contact your Service

 

height of 1m exceeded.

Force Centre

Display shows:

 

Switch off the appliance. Pull

– “No drain - check/drain

 

 

out mains plug.

hose/filter” or

Drain pump is blocked.

Clean the drain pump. Re-

– “Pump Blocked”

 

move foreign bodies from the

 

 

 

 

pump housing.

 

For sink spigot connec-

Clean out spigot.

 

tions: spigot is blocked.

 

 

Fabric softener not rinsed

Conditioner insert in the

Clean the detergent dispenser

in, compartment for ad-

compartment for addi-

drawer, insert the conditioner

ditives is filled with water.

tives is not correctly at-

insert firmly.

tached or is blocked.

 

 

 

 

 

28

Image 28
Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationSafety Prior to using the appliance for the first timeChild safety General safetyResulting overheating may constitute a fire hazard What is shown in the display Cycle end atProgram overview Easy IronUse/Features Care Symbols1 Prior to using for the first time N g u a g eR a c h e Programmende umSetting the time Preparing and sorting washingCarrying out a wash programme prior to first use Preparing washingOpening the door/Loading the washing Running a wash cycleAdding detergent/conditioner If you are using liquid detergent Switching on the appliance/selecting a programmeWashing powder/tablets for the main wash cycle Speed or Rinse Hold is displayed Changing spin speed/selecting rinse holdWith spin speed 0 the TEMP. RPM Options OK Time Setting options SetupTo switch off the option PrewashingSensitive Prewash, Sensitive, Stain, Night CycleSetting times Delay StartTime saving Time Saving Short or Very ShortDelay Start Start in 4hStart Press the OK key. Start in 0 min is shown in the displayWashing Starting a programmeProgramme progress Interrupting a programme/Adding washingWashing cycle complete/Removing the washing SetupIf Rinse Hold or Night Cycle was selected Setting the Memory Memory Store programMemory 1, 2 Changing the MemoryN s e + U n dExtra Rinse Language Set timeClock Child safety device Desired setting. WithContrast and brightness Each press of the key or if Cleaning and maintenance Cleaning procedure Deactivating the child safety device Detergent dispenser drawerClean the glass in the door and the rubber collar regularly Washing drumDoor and rubber collar Top of the washing-in chamber, with a brushWhat to do if Remedying small malfunctionsAdjusted If the wash result is not satisfactory There are grey stains on the washingFoam can still be seen following the final rinse There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Packaging material DisposalOld appliance Technical data Consumption valuesSafety information concerning installation Installing the applianceTransporting the appliance This washing machine cannot be built-inWhen using a sack trolley to transport the washing machine Remove the power supply cableUnpacking Only use the sack trolley on the side of the appliancePage Where to install Electrical Connection Making the appliance levelBrown Live Wire coloured green and yellow Permanent ConnectionConnecting to the water supply Permitted water pressureWater inlet Open the porthole and extract the inlet hoseWater Drainage Pumping heights of over 1 metre For drainage into an outletGuarantee/Customer Service Great BritainEuropean Guarantee LU4 9QQ Slovenija 0870 5 929 Customer CareFor general enquiries concerning Major Appliances132 977 Subject to change without notice