Smeg TLS6, TLS8 manual Packing, Disposing of packaging and old washing machines, Energy saving tips

Page 3

PRECAUTIONS AND GENERAL RECOMMENDATIONS

1.Packing

The packaging materials are 100% recyclable and

bear the recycling symbol . Adhere to local regulations when disposing of packaging material.

If necessary, the power cable may be replaced with an identical one obtained from our After- Sales Service. The power cable must only be replaced by a qualified technician.

2.Disposing of packaging and old washing machines

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product.

The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

The washing machine is built from reusable materials. It must be disposed of in compliance with current local waste disposal regulations.

Before scrapping, cut off the power cable so that the washing machine cannot be connected to the mains.

Remove detergent from compartment if you intend scrapping your washing machine.

4.Energy saving tips

Achieve the best use of energy, water, detergent and time by using the recommended maximum load size.

Do not exceed the detergent dosages indicated in the manufacturer’s instructions.

The Eco Ball - a special system in the outlet - will prevent detergent loss from the drum to avoid detergent loss into the environment.

Use “Prewash” for heavily soiled laundry only! Save detergent, time, water and energy consumption by not selecting “Prewash” for slightly to normally soiled laundry.

Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash program.

Save energy by using a 60° C instead of a 95° C wash programme or a 40° C instead of a 60° C wash programme.

Save energy and time by selecting a high spin speed to reduce the water content in laundry before using a tumble dryer (for machines with adjustable spin speed).

5.General recommendations

Do not leave the washing machine connected when not in use. Turn off the tap.

Before cleaning or carrying out maintenance switch off the washing machine and disconnect it from the mains supply.

3.Safety instructions

6.EC Declaration of Conformity

The washing machine is appropriate for indoor

This washing machine has been designed,

use only.

constructed and distributed in compliance with

Do not store flammable fluids near the appliance.

the safety requirements of EC Directives:

Do not place electrical appliances on the

73/23/EEC Low Voltage Directive

worktop of your washing machine.

89/336/EEC EMC Directive

Children must not be allowed to play with or in

93/68/EEC CE Marking Directive

the washing machine

 

Do not attempt to force the lid open.

 

GB 3

Image 3
Contents Contents Water supply Install the washing machineRemove the packaging and check Remove the transport bracketEnergy saving tips Safety instructions EC Declaration of ConformityPacking Disposing of packaging and old washing machinesAdjustable feet Description of the Washing MachineBefore the First Wash Cycle Dyeing and bleaching Preparation of the WashingSort the laundry Stain removalLoading the laundry Do not use solvents turpentine, benzine, etc Detergents and AdditivesChoice of the right detergents and additives DosageWhere to put detergents and additives Using chlorine bleachUsing starch powder Cleaning the FILTER/ Draining Residual Water Detergent dispenser Water inlet hose filterWater inlet hose Water inlet hoses Appliance exterior and control panelAppliance interior Lid sealTroubleshooting Guide Description of red indications Red indication lamp Indication on Description Specify AFTER-SALES ServiceBefore contacting After-Sales Service Transport and HandlingRemoval of transport bracket InstallationConnect the water inlet hose Adjust the feetFix the U bend C at the very end of the drain hose Water stop anti-flooding systemConnect the water drain hose Is the risk of leakage and of scalding with hot waterBrown Live L To fit a new plug, proceed as followsPolarized Plugs e.g pin, 13 amp plug conforming to BS 1363A