Loading the laundry
1.Open the machine lid by pulling it upwards.
2.Open the drum by pressing the push button (pictures “1a” or “1b” - depending on model).
3.Place the items of laundry into the drum one by one. Do not exceed the maximum load of the programmes indicated in the separate programme chart.
Notes:
-Overloading the machine will result in unsatisfactory washing results and creased laundry.
-Take care that the laundry does not overhang the drum; if this is the case, push the laundry down into the drum so that there is enough free space to close the drum flaps properly.
-Do not use the flaps to push the laundry into the drum.
4.To close the drum, hold both doors in the middle again (picture “2”).
ATTENTION: make sure that the drum flaps are properly locked - depending on the model:
-the metal hook must be completely hooked into the rear door flap - see picture “2a”, or
-all metal hooks must be properly hooked inside the rear door flap, and the button must overlap the edge of the rear door flap - see picture “2b”.
-check that no laundry gets stuck between the flaps, or between flaps and drum.
1a
1b
2
2a
2b
GB 6