Smeg 155620 manual By the user, Interruptions, Temporary interruption

Page 21

START knob (F) and the machine will finish the program with the spin, determined by that particular program.

In case you would like to alter the washing program, turn the program selector to the position “0”, followed by the selection of rinse or merely pumping the water out.

If a power failure occurs during the washing program, when the power is restored the machine will resume the execution of a program where it had been interrupted.

- End of operation

Sound signal indicates that you may now open the door of the machine.

Extract the laundry from the drum and remove any alien objects from the door gasket.

Leave the door ajar to allow the interior to dry.

Close the water inlet faucet.

Switch the machine off by turning the program selector (A) to position “0”.

 

 

 

By the user

 

Interruptions

 

 

 

 

 

 

 

 

 

Temporary interruption

 

 

 

 

 

 

 

By pressing the START/PAUSE knob (F) the

 

 

 

 

 

 

 

program may be suspended at any time.

 

 

 

 

 

 

 

If the Child lock is engaged you have to deactivate it

 

 

 

 

 

 

 

 

 

 

 

 

 

first. Display reads PAUSE.

 

 

 

 

 

 

 

After certain time you may open the door if the

 

 

 

 

 

 

 

water level in the drum is low enough, otherwise

 

 

 

 

 

 

 

you must fist empty the water (use additional

 

 

 

 

 

 

 

program Pumping water out or Spin .

 

 

 

 

 

 

 

By pressing the START knob (F) the program is

 

 

 

 

 

 

 

continued where it had been interrupted.

155620

 

 

 

 

 

 

 

21

Image 21
Contents Washing machine Instructions for Use155620 Technical information Description of washing machine155620 155620 Package removal Removal of transport brackets Installation and connectionLegs are adjustable up to +/- 1 cm Adjustable legsConcrete base, and must be dry and clean Put the appliance in horizontal position by turningPartial Aqua-stop water stop system Complete Aqua-stopConnect the appliance to the mains supply 155620 Functional knobs OperationMode see table of textile treatment Before first use Washing procedureSelecting language Open the door of the machineOpen the water inlet faucet Switch the machine on Washing machine operationSelection of basic programs Synthetics Cotton whites/coloredDelicate WoolSelection of additional function MixExtra rinse Clean water sensor Reduced spin RPM / Rinse holdHigher water level Water plus Cold wash Washing time minutesPre-wash Delayed start SoakingEnd of program Child protection Sound signalAfter the program is completed RinseSoftening Pumping the water out SpinningStart the operation By the user InterruptionsTemporary interruption Setting the time of day Power failureSpecial functions FailuresSetting the Clean water sensor Tips for washing and energy saving Hardness scale Cleaning and maintenance 155620 155620 Failure Possible cause Remedy FailuresTry removing the residues with Failure Tables Program chart 6kgProgram chart/ Additional functions Maintenance chart Page PS PG3,4 OEM Smeg