Smeg 155620 manual

Page 9

The wall socket must be accessible at all times and must be equipped with an earth lead (in accordance with the local safety regulations).

The permanent connection must be fitted by an authorized personnel only.

Damaged mains power cable may be replaced only by the producer or his authorized personnel.

Never plug the appliance into the electric shaver socket or hair dryer socket.

If the socket, the machine is connected to, is protected by the overload protection switch (FID), the nominal differential current of the switch must be 30 mA (switch mark Idn or I∆n). In case of a smaller nominal current in the switch, the machine may be switched off during its normal operation.

155620

9

Image 9
Contents Washing machine Instructions for Use155620 Technical information Description of washing machine155620 155620 Package removal Removal of transport brackets Installation and connectionLegs are adjustable up to +/- 1 cm Adjustable legsConcrete base, and must be dry and clean Put the appliance in horizontal position by turningPartial Aqua-stop water stop system Complete Aqua-stopConnect the appliance to the mains supply 155620 Functional knobs OperationMode see table of textile treatment Before first use Washing procedureSelecting language Open the door of the machineOpen the water inlet faucet Switch the machine on Washing machine operationSelection of basic programs Synthetics Cotton whites/coloredDelicate WoolSelection of additional function MixExtra rinse Clean water sensor Reduced spin RPM / Rinse holdHigher water level Water plus Cold wash Washing time minutesPre-wash Delayed start SoakingEnd of program Child protection Sound signalAfter the program is completed RinseSoftening Pumping the water out SpinningStart the operation By the user InterruptionsTemporary interruption Setting the time of day Power failureSpecial functions FailuresSetting the Clean water sensor Tips for washing and energy saving Hardness scale Cleaning and maintenance 155620 155620 Failure Possible cause Remedy FailuresTry removing the residues with Failure Tables Program chart 6kgProgram chart/ Additional functions Maintenance chart Page PS PG3,4 OEM Smeg