Partial Aqua-stop (water stop system)
In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. In such cases display A turns red.
Inlet pipe must be replaced.
Complete Aqua-stop
In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine.
Security system also detects whether there is any water leakage within the interior of the machine. In such cases washing is suspended, machine switches on the pump and signals error.
Do not immerse the
Water outlet connection • Fix the outlet hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm).
•Wall drain must be installed properly and must enable occasional cleaning.
•Fasten the outlet hose support with a piece of rope led through the hose elbow, to prevent the hose from slipping to the floor.
The end of outlet hose should be placed between minimum 60 cm and maximum 100 cm above the floor level.
Connect the appliance to the mains supply
155620
•Plug the mains power cable to the wall mains socket.
•Required voltage and other information are written on the rating plate above the door opening of the machine.
8