Smeg 155620 manual Reduced spin RPM / Rinse hold, Extra rinse Clean water sensor

Page 15

in bold (spin RPM, extra rinse, more water, sound signal). Using the SELECTION knob (C) you may change settings. Activation of a particular function is confirmed by the relevant symbol appearing on the display. Function is deactivated by another pressing the SELECTION knob (C).

Reduced spin RPM / Rinse hold

 

Best recommended spin RPM for the selected

 

program appear on the display. Using the button (C)

 

in some models you can increase the selected RPM

 

(1300-1800) or reduce in steps till “0”, when all

 

spins are off. Last selection is “pump stop” meaning

 

that laundry will remain soaked in the last rinse

 

water.

 

 

 

RINSE HOLD function is selected if you want the

 

laundry not to be excessively creased in case you

 

are unable to remove it from the drum immediately

 

after the end of washing cycle. This is specially

 

handy for washing of synthetics and delicate

 

laundry

. However, it is not recommended for

 

wool

or manual wash .

 

Extra rinse/

Clean water sensor

 

This function is for persons, especially sensitive

 

to detergents. Using the SELECTION knob (C)

 

you may select one or two extra rinses, or activate

 

the Clean water sensor (S) - certain models only.

 

By activating extra rinse the display indicates

 

adequately increased quantity of water. If the clean

 

water sensor is activated, the display indicates the

 

symbol “S” instead of water quantity. In such cases

 

the machine will select appropriate number of rinses

 

in relation to how clean is rinsing water, detected

 

(measured) by the sensor.

 

Higher water level (Water plus)

 

For washing heavily stained laundry.

 

Using the SELECTION knob (C) you may increase

155620

quantity of water for rinsing one or two times more;

15

Image 15
Contents Washing machine Instructions for Use155620 Technical information Description of washing machine155620 155620 Package removal Removal of transport brackets Installation and connectionPut the appliance in horizontal position by turning Adjustable legsLegs are adjustable up to +/- 1 cm Concrete base, and must be dry and cleanPartial Aqua-stop water stop system Complete Aqua-stopConnect the appliance to the mains supply 155620 Functional knobs OperationOpen the door of the machine Before first use Washing procedureMode see table of textile treatment Selecting languageOpen the water inlet faucet Switch the machine on Washing machine operationSelection of basic programs Wool Cotton whites/coloredSynthetics DelicateSelection of additional function MixExtra rinse Clean water sensor Reduced spin RPM / Rinse holdHigher water level Water plus Cold wash Washing time minutesPre-wash Delayed start SoakingEnd of program Child protection Sound signalAfter the program is completed RinseSoftening Pumping the water out SpinningStart the operation By the user InterruptionsTemporary interruption Failures Power failureSetting the time of day Special functionsSetting the Clean water sensor Tips for washing and energy saving Hardness scale Cleaning and maintenance 155620 155620 Failure Possible cause Remedy FailuresTry removing the residues with Failure Tables Program chart 6kgProgram chart/ Additional functions Maintenance chart Page PS PG3,4 OEM Smeg