Smeg 155620 manual Pumping the water out, Spinning, Start the operation

Page 20

Pumping the water out

Use it when the washing program was interrupted or if pump stop function was engaged, and you only wish to pump the water out of the drum, without spinning.

Spinning

Aggressive spinning for non-delicate laundry at high spin RPM.

Spin revolutions can be altered.

-Adding washing and softening agents (see tips for washing and energy saving)

pre-wash compartment

main wash compartment

softener compartment

If you do not apply the program which includes the pre-wash feature, you may add washing detergent directly into the drum, using the measuring vessel.

When adding softener, be careful to fill the dispenser only up to the marked level.

Be sure to close the detergent dispenser when opening/closing the appliance door.

Start the operation

155620

Program is activated by pushing the START/PAUSE button (F). Sound signal confirms the start, the display indicates first washing stage and time

left to the end of washing. Washing stages are consecutively displayed in accordance with the selected program.

If the machine is set with the delayed start, it will start operating after the delay time expires.

If the pump stop function was set, the program will stop at the final rinse and the display indicates flashing sign pump stop (RINSE).

You may conclude the program by pressing the

20

Image 20
Contents Instructions for Use Washing machine155620 Description of washing machine Technical information155620 155620 Installation and connection Package removal Removal of transport bracketsAdjustable legs Legs are adjustable up to +/- 1 cmConcrete base, and must be dry and clean Put the appliance in horizontal position by turningConnect the appliance to the mains supply Partial Aqua-stop water stop systemComplete Aqua-stop 155620 Operation Functional knobsBefore first use Washing procedure Mode see table of textile treatmentSelecting language Open the door of the machineSelection of basic programs Open the water inlet faucet Switch the machine onWashing machine operation Cotton whites/colored SyntheticsDelicate WoolMix Selection of additional functionHigher water level Water plus Extra rinse Clean water sensorReduced spin RPM / Rinse hold Pre-wash Cold washWashing time minutes End of program Delayed startSoaking Sound signal Child protectionSoftening After the program is completedRinse Start the operation Pumping the water outSpinning Temporary interruption By the userInterruptions Power failure Setting the time of daySpecial functions FailuresSetting the Clean water sensor Tips for washing and energy saving Hardness scale Cleaning and maintenance 155620 155620 Failures Failure Possible cause RemedyTry removing the residues with Failure Program chart 6kg TablesProgram chart/ Additional functions Maintenance chart Page PS PG3,4 OEM Smeg