Smeg 155620 manual Soaking, Delayed start, End of program

Page 17

SELECTION knob (C) on programs for cotton, synthetics, delicate and mixed laundry.

Soaking

This program is intended for removal of stubborn stains. In default setting the soaking function is off. It is engaged by pressing the SELECTION knob

(C). Soaking time may be set from 1 h to maximum 6 hours, in 30 minute steps. At the end of the preset time the machine automatically starts the selected washing program.

Delayed start

The function enables delay of starting the washing procedure for up to 20 hours, in 30 minute intervals for the first two hour delay, and in hourly intervals for the rest.

Delay is set by pressing or keeping pressed the SELECTION knob (C) for the required time of delay.

In case you wish to change or suspend the delayed start after starting the machine with the START knob (F), you may do so by pressing the MENU knob (B). The delayed start appears; using the SELECTION button (C) reset the delay period.

End of program

 

(certain models only)

 

Caution: prior this setting check whether the current

 

time of day is set correctly (see section Special

 

functions). Set the time you want the program to

 

end the washing procedure.

 

The machine will automatically calculate the starting

 

time, depending on the selected program. End of

 

washing may be delayed for maximum 20 hours, in

 

30 minute intervals for the first two hour delay, and

 

in hourly intervals for the rest.

155620

Function is set by pressing or keeping pressed the

17

Image 17
Contents Washing machine Instructions for Use155620 Technical information Description of washing machine155620 155620 Package removal Removal of transport brackets Installation and connectionLegs are adjustable up to +/- 1 cm Adjustable legsConcrete base, and must be dry and clean Put the appliance in horizontal position by turningConnect the appliance to the mains supply Partial Aqua-stop water stop systemComplete Aqua-stop 155620 Functional knobs OperationMode see table of textile treatment Before first use Washing procedureSelecting language Open the door of the machineSelection of basic programs Open the water inlet faucet Switch the machine onWashing machine operation Synthetics Cotton whites/coloredDelicate WoolSelection of additional function MixHigher water level Water plus Extra rinse Clean water sensorReduced spin RPM / Rinse hold Pre-wash Cold washWashing time minutes End of program Delayed startSoaking Child protection Sound signalSoftening After the program is completedRinse Start the operation Pumping the water outSpinning Temporary interruption By the userInterruptions Setting the time of day Power failureSpecial functions FailuresSetting the Clean water sensor Tips for washing and energy saving Hardness scale Cleaning and maintenance 155620 155620 Failure Possible cause Remedy FailuresTry removing the residues with Failure Tables Program chart 6kgProgram chart/ Additional functions Maintenance chart Page PS PG3,4 OEM Smeg