Smeg 155620 manual Cleaning and maintenance

Page 26

Cleaning and maintenance

Disconnect the washing machine from the mains before cleaning!

The casing should be cleaned with soft cloth and mild detergent.

The interior of the drum and the door gasket is cleaned by washing at 60°C without laundry and adding half quantity of detergent.

If necessary, clean the detergent dispenser. Pull it out from its casing completely by pressing the flap (see Fig.).

If necessary, clean the cover of the bung under the running water.

155620

26

Image 26
Contents Instructions for Use Washing machine155620 Description of washing machine Technical information155620 155620 Installation and connection Package removal Removal of transport bracketsConcrete base, and must be dry and clean Adjustable legsLegs are adjustable up to +/- 1 cm Put the appliance in horizontal position by turningConnect the appliance to the mains supply Partial Aqua-stop water stop systemComplete Aqua-stop 155620 Operation Functional knobsSelecting language Before first use Washing procedureMode see table of textile treatment Open the door of the machineSelection of basic programs Open the water inlet faucet Switch the machine onWashing machine operation Delicate Cotton whites/coloredSynthetics WoolMix Selection of additional functionHigher water level Water plus Extra rinse Clean water sensorReduced spin RPM / Rinse hold Pre-wash Cold washWashing time minutes End of program Delayed startSoaking Sound signal Child protectionSoftening After the program is completedRinse Start the operation Pumping the water outSpinning Temporary interruption By the userInterruptions Special functions Power failureSetting the time of day FailuresSetting the Clean water sensor Tips for washing and energy saving Hardness scale Cleaning and maintenance 155620 155620 Failures Failure Possible cause RemedyTry removing the residues with Failure Program chart 6kg TablesProgram chart/ Additional functions Maintenance chart Page PS PG3,4 OEM Smeg