| • Put the appliance in horizontal position by turning |
Leveling the appliance | |
| the adjustable legs. |
| The legs are adjustable up to +/- 1 cm. |
| The floor below the appliance should have |
| concrete base, and must be dry and clean, |
| otherwise the appliance may slide. |
•If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine.
Water inlet connection | To ensure correct operation of the appliance, |
| water pressure inlet must be between 0,05 |
| and 0,8 MPa. |
Minimum water pressure can be established by measuring the quantity of poured out water. 3 litres of water must be poured out from completely opened tap in 15 seconds.
•Insert the gasket with screen into the water inlet hose thread Screw the hose thread to the water faucet
•In case of hot and cold water connection, connect one hose to cold and other to hot water faucet as marked at the rear of the appliance (letters C and H) (C - cold; H - hot)
155620
7