-Now minutes start flashing; they are set the same way as hours.
-Confirm setting by pushing the MENU knob (B).
-Return the program selector back to “0” position. Set time is automatically saved.
•Setting the Clean water sensor
In order for the Clean water sensor 
to start working properly, it must be first calibrated with water that the washing machine is connected to. This is performed in the following manner:
-Press MENU (B) and Easy ironing knobs (E), and turn the program selector to the first clockwise program. Display reads SENSOR CALIBRATION.
-Start calibration by pushing the START knob
(F). The machine performs calibration procedure automatically. During the process the reading SENSOR CALIBRATION is flashing. When the procedure is completed, the display reads END.
-Return the program selector (A) back to “0” position.
If you change the inlet water source during the use of your washing machine, or in case you think that water quality has changed, you may repeat the calibration procedure at any time. The machine will save the value of the last calibration.
155620
23