Special programs
For specific applications, select any of the following programs:
• Rinse
This program is used when you want to rinse or starch separately.
• Spin + Drain
This program spins with maximum possible rpm in the default setting after the water drains from the machine.
C Use a lower spin speed for delicate laundry.
Temperature selection
Whenever a new program is selected, the temperature anticipated for that program appears on the temperature indicator .
To change the temperature, press the temperature button. Temperature decreases in 10° increments.
Cold selection is shown with
When the “Temperature” button is pressed after Cold is selected, the maximum temperature of the program you have selected will be displayed.
To decrease the temperature, press the “Temperature” button again.
| Normally soiled, white cottons |
90˚C | and linens. (Ex.: coffee table |
covers, tablecloths, towels, bed | |
| sheets) |
| Normally soiled, fade proof |
| coloured linens, cottons or |
60˚C | synthetic clothes (Ex.: shirts, |
nightgowns, pyjamas) and | |
| lightly soiled white linen clothes |
| (Ex.: underwear) |
40˚C | Blended clothes including |
30˚C | synthetics and woollens as well |
Cold | as delicates. |
Economy Symbol
Shows energy saving programs and temperature selections.
As “Intensive” and “Hygiene” programs are long programs with higher temperature selections to ensure hygiene, “Economy” Symbol will not light up.
Spin Speed selection
Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator.
To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively.
Rinse hold is shown with “
” and no spin is shown with “ ” symbols.
F1 | F2 | F3 | F4 |
If you are not going to unload your clothes immediately after the cycle, you may use rinse hold function in order to prevent your clothes becoming creased when there is no water in the machine. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function:
-Adjust the spin speed.
-Press “Start/Pause/Cancel” button. Program resumes. Your machine drains the water and spins your laundry.
You can use no spin function in order to drain the water without spinning at the end of the program.
21
EN