Ending the program through cancelling
“Start/Pause/Cancel” button is pressed for 3 seconds to cancel the program. Start symbol will flash during cancellation. After cancellation, the symbol of the corresponding step at which the cancellation was made will remain lit and “End” will appear on the screen.
Program in rinse hold mode
•This process is shown with the flashing Spin Symbol and the lit up Standby Symbol.
If you wish to spin when the machine is in this mode:
Adjust the spin speed. Press “Start/ Pause/Cancel” button. The program continues, pumps out the water and spins. The Standby Symbol fades out and Start Symbol lights up.
If you want to discharge the water only without spinning:
Press “Start/Pause/Cancel” button. The Standby symbol will fade. The Start symbol will light up. The program continues and only drains the water.
End of program
When the program is finished, the symbols of the relevant steps will remain lit up and the auxiliary function, spin and temperature data selected at the start- up of the program will remain selected. “End” will appear on the display.
27
EN