Auxiliary functions, Time display

Auxiliary functions

Auxiliary Function Selection Buttons

a b c d

•Depending on the program, you can select the desired auxiliary function by pressing the buttons a, b, c,d.

•Select the required auxiliary functions before starting the program.

•Some combinations cannot be selected together. Ex.: Pre-wash and Quick Wash.

•Symbol of the selected auxiliary function will light up.

Auxiliary function selection

If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.

Ex.: If you want to select pre-wash first and then quick wash, pre-wash will be cancelled and quick wash will remain active.

Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Selection Table”)

• Prewash

When you select this function (a), the display will indicate “F1” symbol.

•A pre-wash is only worthwhile for heavily soiled laundry. Without pre-wash you save energy, water, detergent and time.

•Pre-wash without detergent is recommended for lace and curtains.

•Quicker Wash

With this function (b), the wash time is shortened. “F2” symbol lights up on the display.

•Use this function for smaller amounts or slightly soiled laundry.

•Extra Rinse

When this function (c) is selected, washing and rinsing is performed with plenty of water. “F3” symbol lights up on the display.

• Anti-Crease

With this function (d), drum movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. “F4” symbol lights up on the display.

•Use this function for delicate laundry that crease easily.

C Whenever you select this auxiliary function, load your machine with half of the maximum laundry specified in the program table.

• Rinse Hold

If you are not going to unload your clothes immediately after the program completes, you may use rinse hold function and keep your laundry in the final rinsing water in order to prevent them become creased when there is no water in the machine. Press “Start/Pause” button after this process if you want to drain the water without spinning. Program resumes. Your machine drains the water and program completes.

If you want to spin your laundry that you left in water:

-Adjust the spin speed.

-Press Start/Pause button

Program resumes. Your machine drains the water, spins the laundry and program completes.

Time display

The display shows the time remaining for the program to complete while a program is running. Time is displayed in hours and minutes as “01:30”.