Beko WI 1382 user manual Check the supply power

Page 36

Laundry remains wet at the end of the programme

•Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Machine does work. Nothing is displayed on the screen.

The plug might not be plugged in the

mains outlet.	Check the plug.
Fuse may have blown.	Check the fuse.
Electricity may be cut off.	Check the supply power.
The “On/Off” button might have not	Press this button.
been pressed.

The machine did not start after the program was selected and the «Start/Pause/ Cancel» button was pressed.

The front door may be ajar.

The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your machine, water cut-off symbol may light up too)

Water may have been cut off.

You can restart your machine by pressing the «Start/Pause/Cancel» button for a short time after ensuring that the water is not cut off.

AIf you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

36

EN

Image 36

Contents Washing Machine Explanation of symbols Table of Contents Your washing machine OverviewTechnical specifications Important safety instructions General safetyIntended use Childrens safety Installation Appropriate installation locationRemoving packaging reinforcement Removing the transportation locksConnecting water supply Connecting to the drainAdjusting the feet Raising the applianceElectrical connection Electrical requirementsFitting a different plug First use Disposing of packaging materialTransportation of the product Disposing of the old productPreparation Things to be done for energy savingSorting the laundry Preparing laundry for washingCorrect load capacity Loading the laundryDetergents and softeners Detergent DrawerDetergent drawer compartments are indicated below II Main Wash CompartmentPre-Wash Compartment StarchBleaches Eliminating lime formationTips for efficient washing Woolens/SilksSelecting a Program and Operating Your Machine Control panelDisplay symbols Turning the machine onProgram selection Main programsAdditional programs Temperature selection Special programsSpin Speed selection Program and consumption table Page Auxiliary functions Time displayStarting the Program Progress of programSwitching the machine to standby mode Changing the selections after the program has startedChild-proof lock Ending the program through cancelling Program in rinse hold modeEnd of program Maintenance and cleaning Detergent DrawerDraining any remaining water and cleaning the pump filter Into their positions and pushing the upper part of it Troubleshooting Tap is turned off. Open the inlet water taps fullyPage Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Check the supply power Product Fiche BUILT-IN Installation Page 338 190 338 Use 35mm hinge cutting tool Page Page Page To increase height of product order optional part no Page Page Page Page Service once the manufacturers guarantee has expired UK Mainland & Northern IrelandRepublic of Ireland What is covered? What is not covered?Important notes