Troubleshooting | Blomberg WNF 8447 AE 40, WNF 8427 ACE 40 specs

7 Troubleshooting

Programme cannot be started or selected.

•Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See “Canceling the programme”)

Water in the machine.

•Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine.

Machine vibrates or makes noise.

•Machine might be standing unbalanced. >>> Adjust the feet to level the machine.

•A hard substance might have entered into the pump filter. >>> Clean the pump filter.

•Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.

•Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.

•Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine.

•Machine might be leaning on a rigid item. >>> Make sure that the machine is not leaning on anything.

Machine stopped shortly after the programme started.

•Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage restores to the normal level.

Programme time does not countdown. (On models with display)

•Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.

•Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.

•Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be

activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Foam is overflowing from the detergent drawer.

•Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the

main wash compartment of the detergent drawer.

C Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.

Laundry remains wet at the end of the programme

•Excessive foam might have occurred and automatic foam absorption system might have been

activated due to too much detergent usage. >>> Use recommended amount of detergent. C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum

to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

A If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

EN2820522209_EN/311011.0955

WNF 8467 ACE 40, WNF 8427 ACE 40, WNF 8447 AE 40 specifications

Blomberg is well-known for producing high-quality home appliances, and their range of washing machines exemplifies this reputation. Among the notable models are the Blomberg WNF 8447 AE 40, WNF 8427 ACE 40, and WNF 8467 ACE 40, each crafted to deliver optimal performance, efficiency, and user-friendly features.

The WNF 8447 AE 40 stands out due to its advanced technology and innovative design. This model is equipped with a ProSmart Inverter Motor, which not only ensures energy efficiency but also significantly reduces noise levels during operation. With a capacity of 8 kg, it is suitable for medium-sized households, making washing laundry a seamless task. The WNF 8447 AE 40 also features a 1400 RPM spin speed, ensuring that clothes come out cleaner and with less residual moisture, reducing drying times. Additionally, the machine includes multiple washing programs tailored for various fabric types and dirt levels, offering versatility for all laundry needs.

The WNF 8427 ACE 40 shares many similarities with the WNF 8447 AE 40 but focuses more on compactness and efficiency. This model is designed to fit smaller spaces while still providing a reliable 7 kg capacity. With an A+++ energy rating, it ensures low energy consumption without compromising washing performance. The child lock feature adds an extra layer of safety, making it a great choice for families. Furthermore, the Quick Wash option allows users to clean lightly soiled garments in as little as 28 minutes, perfect for busy lifestyles.

On the other hand, the WNF 8467 ACE 40 is the premium option among these models, ideal for larger households with its 8 kg load capacity. This washing machine incorporates the latest in sensor technology to optimize water and energy use based on the load size. It also features a variety of allergy-friendly programs, making it suitable for sensitive skin. The SteamTechnology feature reduces wrinkles and sanitizes clothes, effectively eliminating allergens.

Overall, the Blomberg washing machines WNF 8447 AE 40, WNF 8427 ACE 40, and WNF 8467 ACE 40 exemplify the brand's commitment to quality, innovation, and user convenience. With their advanced features and energy-efficient designs, they make laundry day easier and more sustainable for households of all sizes. Whether it's superior cleaning capabilities, compact design, or added safety features, each model brings something unique to the table, enhancing the laundry experience.