Adjusting the feet, First use | Blomberg WNF 8427 ACE 40 guide

come out excessively wet. Therefore, follow the heights described in the figure.

•To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the drain more than 15 cm. If it is too long, cut it short.

•The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

•If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m.

To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

Adjusting the feet

A In order to ensure that the product operates more silent and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.

A Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

Electrical connection

Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

• Connection must comply with national regulations.

• Power cable plug must be within easy reach after installation.

• The voltage and allowed fuse or breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.

• The specified voltage must be equal to your mains voltage.

• Do not make connections via extension cables or multi-plugs.

B Damaged power cables must be replaced by the Authorized Service Agents.

First use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Before starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr. II). If the anti-limescale is in tablet form, put only one tablet into compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.

1.Loosen the lock nuts on the feet by hand.

2.Adjust the feet until the product stands level and balanced.

3.Tighten all lock nuts again by hand.

C Use an anti-limescale suitable for the washing machines.

C Some water might have remained in the product due to the quality control processes

WNF 8467 ACE 40, WNF 8427 ACE 40, WNF 8447 AE 40 specifications

Blomberg is well-known for producing high-quality home appliances, and their range of washing machines exemplifies this reputation. Among the notable models are the Blomberg WNF 8447 AE 40, WNF 8427 ACE 40, and WNF 8467 ACE 40, each crafted to deliver optimal performance, efficiency, and user-friendly features.

The WNF 8447 AE 40 stands out due to its advanced technology and innovative design. This model is equipped with a ProSmart Inverter Motor, which not only ensures energy efficiency but also significantly reduces noise levels during operation. With a capacity of 8 kg, it is suitable for medium-sized households, making washing laundry a seamless task. The WNF 8447 AE 40 also features a 1400 RPM spin speed, ensuring that clothes come out cleaner and with less residual moisture, reducing drying times. Additionally, the machine includes multiple washing programs tailored for various fabric types and dirt levels, offering versatility for all laundry needs.

The WNF 8427 ACE 40 shares many similarities with the WNF 8447 AE 40 but focuses more on compactness and efficiency. This model is designed to fit smaller spaces while still providing a reliable 7 kg capacity. With an A+++ energy rating, it ensures low energy consumption without compromising washing performance. The child lock feature adds an extra layer of safety, making it a great choice for families. Furthermore, the Quick Wash option allows users to clean lightly soiled garments in as little as 28 minutes, perfect for busy lifestyles.

On the other hand, the WNF 8467 ACE 40 is the premium option among these models, ideal for larger households with its 8 kg load capacity. This washing machine incorporates the latest in sensor technology to optimize water and energy use based on the load size. It also features a variety of allergy-friendly programs, making it suitable for sensitive skin. The SteamTechnology feature reduces wrinkles and sanitizes clothes, effectively eliminating allergens.

Overall, the Blomberg washing machines WNF 8447 AE 40, WNF 8427 ACE 40, and WNF 8467 ACE 40 exemplify the brand's commitment to quality, innovation, and user convenience. With their advanced features and energy-efficient designs, they make laundry day easier and more sustainable for households of all sizes. Whether it's superior cleaning capabilities, compact design, or added safety features, each model brings something unique to the table, enhancing the laundry experience.