Important safety instructions | Blomberg WNF 8467 ACE 40 specification

1 Important safety instructions

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

General safety

•This product should not be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.

•Never place the product on a carpet-covered floor; otherwise, lack of airflow beneath the machine will cause electrical parts to overheat.

This will cause problems with your product.

•Do not operate the product if the power cable

/ plug is damaged. Call the Authorized Service Agent.

•Have a qualified electrician connect a

16-Ampere fuse to the installation location of the product.

•If the product has a failure, it should not be operated unless it is repaired by the Authorized

Service Agent. There is the risk of electric shock!

•This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

•Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that

will arise when the product is used without grounding in accordance with the local regulations.

•The water supply and draining hoses must be securely fastened and remain undamaged.

Otherwise, there is the risk of water leakage.

•Never open the loading door or remove the filter while there is still water in the drum.

Otherwise, risk of flooding and injury from hot water will occur.

•Do not force open the locked loading door. The loading door will be ready to open just a few minutes after the washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.

•Unplug the product when not in use.

•Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!

•Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.

•Use detergents, softeners and supplements suitable for automatic washing machines only.

•Follow the instructions on the textile tags and on the detergent package.

•The product must be unplugged during installation, maintenance, cleaning and repairing procedures.

•Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

Intended use

•This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.

•The product must only be used for washing and rinsing of laundry that are marked accordingly.

•The manufacturer waives any responsibility arisen from incorrect usage or transportation.

Children's safety

•Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product.

•Do not forget to close the loading door when leaving the room where the product is located.

•Store all detergents and additives in a safe place away from the reach of the children.

2 Installation

Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.

C Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

B Installation and electrical connections of the product must be carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

A Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

C Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

WNF 8467 ACE 40, WNF 8427 ACE 40, WNF 8447 AE 40 specifications

Blomberg is well-known for producing high-quality home appliances, and their range of washing machines exemplifies this reputation. Among the notable models are the Blomberg WNF 8447 AE 40, WNF 8427 ACE 40, and WNF 8467 ACE 40, each crafted to deliver optimal performance, efficiency, and user-friendly features.

The WNF 8447 AE 40 stands out due to its advanced technology and innovative design. This model is equipped with a ProSmart Inverter Motor, which not only ensures energy efficiency but also significantly reduces noise levels during operation. With a capacity of 8 kg, it is suitable for medium-sized households, making washing laundry a seamless task. The WNF 8447 AE 40 also features a 1400 RPM spin speed, ensuring that clothes come out cleaner and with less residual moisture, reducing drying times. Additionally, the machine includes multiple washing programs tailored for various fabric types and dirt levels, offering versatility for all laundry needs.

The WNF 8427 ACE 40 shares many similarities with the WNF 8447 AE 40 but focuses more on compactness and efficiency. This model is designed to fit smaller spaces while still providing a reliable 7 kg capacity. With an A+++ energy rating, it ensures low energy consumption without compromising washing performance. The child lock feature adds an extra layer of safety, making it a great choice for families. Furthermore, the Quick Wash option allows users to clean lightly soiled garments in as little as 28 minutes, perfect for busy lifestyles.

On the other hand, the WNF 8467 ACE 40 is the premium option among these models, ideal for larger households with its 8 kg load capacity. This washing machine incorporates the latest in sensor technology to optimize water and energy use based on the load size. It also features a variety of allergy-friendly programs, making it suitable for sensitive skin. The SteamTechnology feature reduces wrinkles and sanitizes clothes, effectively eliminating allergens.

Overall, the Blomberg washing machines WNF 8447 AE 40, WNF 8427 ACE 40, and WNF 8467 ACE 40 exemplify the brand's commitment to quality, innovation, and user convenience. With their advanced features and energy-efficient designs, they make laundry day easier and more sustainable for households of all sizes. Whether it's superior cleaning capabilities, compact design, or added safety features, each model brings something unique to the table, enhancing the laundry experience.