Control Panel (continued)
控制面板（續）
Lid Lock function 機蓋緊鎖功能
The lid will be locked automatically when washing for children's safe.
為防止意外傷害及保護兒童的安全，洗衣過程中供水開始後，洗衣機會自動將機蓋鎖緊。
Setup safe model 設定安全保護模式
1 Close the Lid, press 
button. 關閉機蓋，按下電源開關按鈕
。
2 Press and hold down the 
button for at least three seconds. 持續按住
3 秒鐘以上。
The buzzer makes a sound of "beep" to announce the completion of setup.
Lid Lock indicator will light. 
蜂鳴器發出“嗶”聲響告知設定已完成。 機蓋緊鎖標誌指示燈被點亮。 
To unlock the Lid Lock, repeat the above operations once again.
The buzzer makes a sound of "beep" to announce the completion of remove.
Lid Lock indicator will be out. 
要解除機蓋緊鎖功能，再一次重復上述操作。 蜂鳴器發出“嗶”聲響告知設定已解除。 機蓋緊鎖標誌指示燈熄滅。 
3 Cut off the power supply. 切斷電源。
Attention 注意 | With the set of Lid Lock function, the washing machine can't operate if the lid is opened. (The control | |
| panel will release the alarm if the lid is opened) | |
|
|
設定機蓋緊鎖功能後，洗衣機不能在機蓋處於開狀態時運轉。(機蓋處於開狀態時，控制面板將發出 警報)
When you want to open the lid 想打開機蓋時
Press 
button 
Lock will be removed automatically after washing. Lid can be opened.
按下 
按鈕 
旋轉結束，鎖緊解除，可打開機蓋。
When beginning again 再動時
With the set of safe mode, the lid will be locked as the washing machine restarts.
Without the set of safe mode, the lid will be locked automatically during the course spinning.
在設定為安全保護模式時，洗衣機再動時機蓋會立即被鎖緊。 若沒有設定安全保護模式，在脫水時機蓋會自動鎖緊。
Hope to switch off the buzzer beep after the completion of the washing process
希望消除洗衣結束的蜂鳴聲時
Follow the below steps to switch off the buzzer beep after the completion of washing process.
按以下順序進行操作，可消除洗衣結束的蜂嗚聲。
1 Press the power button.
接通電源開關。
2 Press and hold down the START/PAUSE button for at least three seconds, the buzzer beep can be switched off.
持續按住動按鈕 3 秒鐘以上，蜂嗚聲消除。
You can press and hold down the START/PAUSE button for at least three seconds to recover the beeping.
接通電源開關後，持續按住動按鈕 3 秒鐘以上，可將蜂嗚聲恢復。
16