H ow to use washer
8.Wash/Rinse Temperature
•Select a water temperature based on the type of load you are washing.
•Follow the fabric care label and chart below for best results.
Suggested Wash Temp. | Garment | |
Hot | Whites and Heavy | |
122°F (50°C) | soiled | |
Warm | Most loads | |
104°F (40°C) | ||
| ||
Cold | Brightly colored items, | |
77°F (25°C) | washable woolens |
•Warm rinses leave the loads dryer than cold rinses. Warm rinses increase wrinkling.
•In cold climates, a warm rinse makes the load more comfortable to handle.
•Cold rinses save energy.
•The Cold rinse temperatures depend on the cold water at your faucet.
•Warm rinses are regulated at approximately 86°F (30°C).
•For the Tap Cold/Cold setting, both wash and rinse temperatures depend on the cold water at your faucet.
9.Spin speed
•To change the spin speed, press the Spin Speed button repeatedly to cycle through available options.
•To start Drain/Spin cycle:
1.Press Power ( 
) button to turn on.
2.Press Spin Speed button only.
3.Press Start/Pause ( 
) button.
10.Soil Level
•To change the soil level, press the Soil Level button repeatedly until the desired setting is on.
11.Beeper
•Press repeatedly to adjust the volume of the Beeper.
LED DISPLAY
1
2
3
4
1. DOOR LOCK INDICATOR
Indicates that the door is locked. The washer door will lock while the washer is operating. The door can be unlocked by pressing the START/PAUSE button to stop the washer.
2. ESTIMATED TIME REMAINING
When the START/PAUSE button is pressed, the washer automatically detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.
NOTE:
The cycle time displayed may appear much longer than that of a
The displayed time is for the complete cycle, rather than just the agitation portion of the cycle, as is typically shown on a
3.CYCLE COMPLETION INDICATOR
Shows how much of the current wash cycle has been completed.
4. STATUS/CYCLE DISPLAY
This portion of the display shows the selected cycle, operating status, and special messages.
If a cycle has special instructions, they will also be displayed in this area.
15