JVC UX-H30, CA-UXH33, SP-UXH33 manual Receiving FM Stations with RDS, Tuning in to a Preset Station

To preset stations manually—Manual presetting

You need to preset stations separately for the FM and

To tune in to a preset station directly using the number buttons

AM (MW) bands.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start over from step 2.

On the remote control ONLY:

1Tune in to the station you want to preset.

• See “Tuning in to a Station” on page 12.

2 Press SET. SET

On the remote control ONLY:

Pressing the number button(s) allows you to select the preset number you want.

Ex.: For preset number 5, press 5. For preset number 15, press

+10, then 5.

For preset number 20, press +10, then 10.

For preset number 30, press +10, +10, then 10.

1 2 3

4 5 6

7 8 9

1010

3 Press UP or DOWN UP

to select a preset number.

DOWN

4Press SET again.

The tuned station in step 1 is stored in the preset number selected in step 3.

•Storing a new station on a used number erases the previously stored one.

When you unplug the power cord or if a power failure occurs

The tuner preset stations will be erased in a few days. If this happens, preset the stations again.

Receiving FM Stations with RDS

RDS (Radio Data System) allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. When tuned in to an FM station which provides the RDS service, the RDS indicator lights up on the display.

With the unit, you can receive the following types of RDS signals.

PS (Program Service):

Shows commonly known station names.

PTY (Program Type):

Shows types of broadcast programs.

RT (Radio Text):

Shows text messages the station sends.

Enhanced Other Networks:

Provides information about the types of the programs sent by other RDS stations.

Tuning in to a Preset Station
On the remote control ONLY:
1 Press TUNER to select the	TUNER
band.

The unit automatically turns on and tunes in to the previously

received station—either FM or AM (MW).

•Each time you press the button, the band alternates between FM and AM (MW).

UP

2 Press UP or DOWN to select a preset number.

DOWN

More about RDS

•Some FM stations do not provide RDS signals.

•RDS services vary among FM RDS stations. For details on RDS services in your area, check with local radio stations.

•RDS may not work correctly if the received station is not transmitting the signals properly or if the signal strength is weak.

13