WasherOperation, Dispenser operation | Whirlpool W10063560 specification

Dispenser operation

■Did you follow the manufacturer’s directions when adding detergent and fabric softener to the dispensers? Measure detergent and fabric softener. Slowly pour into the dispensers. Wipe up all spills. Dilute fabric softener in the fabric softener dispenser.

■Did you put powdered or liquid color-safe bleach into the liquid chlorine bleach dispenser (on some models)?

Add powdered or liquid color-safe bleach directly to the washer basket. Do not use the chlorine bleach dispenser for color-safe bleach.

■Is the fabric softener dispenser clogged?

Clean the fabric softener dispenser. See “Washer Care” for details.

■Are the laundry additives in the correct dispenser compartment?

Add the correct amounts of detergent, fabric softener or liquid chlorine bleach to the correct compartments. Add powdered or liquid color-safe bleach to the Main Wash compartment.

■Is there water in the dispenser at the end of the cycle? A small amount of water will remain in the dispenser compartment. This is normal.

Washer odor

■Have you run the Clean Washer Cycle lately?

To freshen your washer and to avoid odors, see “Cleaning Your Washer.”

■Are you using HE detergent?

Use of non-HE detergent can cause a film residue which can result in odor.

■Did you leave the door open after use?

This washer has a tight seal to avoid water leaks. To avoid odors leave the door open to allow the washer to dry between uses.

Door won't unlock

■Did all of the water drain out of the washer during the spin?

Select DRAIN/SPIN to remove any water remaining in the washer. The washer door will unlock at the end of the drain.

■Is the door locked and is the “Add a garment” light on? Press PAUSE/CANCEL once. The door will unlock.

WasherOperation

Washer won't run, fill, rinse or tumble; washer stops

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Is the power cord plugged into a grounded 3 prong outlet?

Plug power cord into a grounded 3 prong outlet.

■Are you using an extension cord? Do not use an extension cord.

■Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse, or reset the circuit breaker. If the problem continues, call an electrician.

■Are both the hot and cold water faucets turned on? Turn on the water.

■Is the water inlet hose kinked? Straighten the hoses.

■Are the water inlet valve screens clogged?

Turn off the water and remove inlet hoses from the washer. Remove any accumulated film or particles. Reinstall hoses, turn on water and check for leaks.

■Is the washer in a normal pause in the cycle?

The washer pauses for about 2 minutes during certain cycles. Allow the cycle to continue. Some cycles feature periods of tumbling and soak.

■Is the washer overloaded? Wash smaller loads.

■Is the washer door firmly shut?

The door must be closed during operation.

■Are the shipping bolts removed?

All four shipping bolts must be removed for proper operation of the washer.

■Has a cycle been selected, but START has not been selected and held for 1 second?

Press and hold START, for 1 second.

■Was the door open after completion of last cycle?

The door must be opened and closed again to start a new cycle.

W10063560 specifications

The Whirlpool W10063560 is a highly efficient refrigerator water filter designed to enhance the quality of drinking water by reducing contaminants and ensuring a consistent supply of clean water for your family. This advanced filter is compatible with a range of Whirlpool refrigerator models, making it a versatile choice for many households.

One of the main features of the W10063560 is its ability to reduce harmful substances such as chlorine, lead, and particulates, providing you with fresher and better-tasting water. By effectively filtering out these impurities, it not only improves the taste and odor of your water but also promotes a healthier lifestyle by reducing the potential for exposure to harmful chemicals.

The installation of the W10063560 filter is straightforward, allowing users to easily replace the old filter without the need for specialized tools. The filter typically needs to be replaced every six months, depending on water quality and usage, ensuring that you always have access to purified water. An indicator light on the refrigerator may alert you when it’s time for a replacement, making maintenance hassle-free.

In addition to its filtration capabilities, the W10063560 incorporates advanced technologies that enhance its performance. The filter features a high-grade carbon block, which effectively captures small particles and impurities. This technology ensures that the water flows effortlessly while maintaining high filtration efficiency, enabling consumers to enjoy clean water without compromising water pressure.

Another characteristic of this filter is its exceptional size compatibility, which fits various Whirlpool refrigerator models equipped with a filtered water dispenser. Its compact design ensures that it does not take up unnecessary space, allowing for a seamless integration into your refrigerator’s existing configuration.

This water filter also meets stringent industry standards, making it a reliable option for ensuring safe drinking water for your family. It has been tested and certified to the standards set forth by the NSF International, verifying its effectiveness in removing certain contaminants from drinking water.

In summary, the Whirlpool W10063560 water filter is an essential accessory for any Whirlpool refrigerator, promoting the health and well-being of families by delivering clean, refreshing water. With its ease of installation, advanced filtration technologies, and compatibility with various refrigerator models, it stands out as a top choice for consumers looking to improve their water quality.