Whirlpool W10063560 manual Location Requirements, Installation clearances, Washer Dimensions

Page 5

Location Requirements

Selecting the proper location for your washer improves performance and minimizes noise and possible washer “walk.”

Your washer can be installed under a custom counter, or in a basement, laundry room, closet, or recessed area. See “Drain System.”

Companion appliance location requirements should also be considered. Proper installation is your responsibility.

You will need

A water heater set to deliver 120°F (49°C) water to the washer.

A grounded electrical outlet located within 6 ft (1.8 m) of where the power cord is attached to the back of the washer. See “Electrical Requirements.”

Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves, and water pressure of 20-100 psi (137.9-689.6 kPa).

A level floor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the washer on soft floor surfaces, such as carpets or surfaces with foam backing, is not recommended.

A sturdy and solid floor to support the washer with a total weight (water and load) of 400 lbs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C). Some water can remain in the washer and can cause damage in low temperatures.

Recommended installation spacing for custom undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

2" (5 cm)

 

 

36" min.

 

 

(91.4 cm)

 

 

1"

27"

1"

(2.5 cm)

(68.6 cm)

(2.5 cm)

Recommended installation spacing for recessed or closet installation, with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

Installation clearances

The location must be large enough to allow the washer door to be fully opened.

Additional spacing should be considered for ease of installation and servicing. The door opens more than 90°, and it is not reversible.

Additional clearances might be required for wall, door, and floor moldings.

Additional spacing of 1" (2.5 cm) on all sides of the washer is recommended to reduce noise transfer.

Companion appliance spacing should also be considered.

Washer Dimensions

 

 

48"

 

 

(122 cm)

1"

30¹⁄₂"

4"

(2.5 cm)

(77.5 cm)

(10.2 cm)

 

A

 

 

3"

 

(7.6 cm)

48 in.2

 

(310 cm2)

 

24 in.2

3"

(155 cm2)

 

(7.6 cm)

B

A. Side view - closet or confined area B. Closet door with vents

50¹⁄₄"

27"

(68.6 cm)

Recessed or closet installation - Washer on pedestal

(127.6 cm)

36"

(91.4 cm)

30¹⁄₂"

(77.5 cm)

1"

27"

1"

(2.5 cm)

(68.6 cm)

(2.5 cm)

A

 

 

38" min.

 

 

(96.5 cm)

1"

30¹⁄₂"

4"

(2.5 cm)

(77.5 cm)

(10.2 cm)

 

B

 

A. Recessed area

B. Side view - closet or confined area

5

Image 5
Contents W10063560 Use& CareGuideGuided’utilisation etd’entretien Table DES Matières Your safety and the safety of others are very important Washer SafetyOptions Installation RequirementsToolsandParts Location Requirements Installation clearancesWasher Dimensions DrainSystem Recommended installation spacing for cabinet installationStandpipe drain system wall or floor views a & B Laundry tub drain system view aGrounding Instructions ElectricalRequirementsRemoveTransportSystem Installation InstructionsConnecttheInletHoses Connect the inlet hoses to the water faucetsRoutetheDrainHose SecuretheDrain HoseConnect the inlet hoses to the washer Floor drainLevel theWasher CompleteInstallationFeatures and Benefits Washer USE UsingtheProperDetergentStartingYourWasher First Wash Cycle Without LaundryUsingtheDispenser StatusLights PausingorRestartingChangingCycles andOptions Cycles OptionsandModifiers NormalSoundsLaundryGuide Laundry TipsPreparing clothes for washing Cycle Suggested Load Type Available OptionsStain Removal Guide LoadingSorting UnloadingWasher Care CleaningYourWasherVacation,Storage,andMovingCare WaterInletHosesError codes Noisy, vibrating, off-balance TroubleshootingWasherandComponents LeakingDispenser operation WasherOperationWasher odor Door wont unlockClothes Care InCanada Assistance or ServiceTheU.S.A Disclaimer of Implied Warranties Limitation of Remedies TWO Year Limited WarrantyItems Whirlpool will not PAY for Votre sécurité et celle des autres est très importante Sécurité DE LA LaveuseOutillageetpièces Exigences DinstallationEnsemble de superposition Dimensions de la laveuse Exigences demplacementInstallation dans un encastrement ou placard Dégagements de séparation à respecterSystèmedevidange Espacement recommandé pour l’installation dans un placardLes dimensions indiquées sont pour lespacement recommandé Système de vidange au plancher vue B SpécificationsélectriquesSystème de vidange avec évier de buanderie vue a Élimination des accessoiresdetransport Instructions DinstallationRaccordementdes tuyauxdalimentation Connecter les tuyaux dalimentation aux robinets deauConnecter les tuyaux dalimentation à la laveuse Acheminementdutuyau devidangeÉgout au plancher Retirer le tuyau de vidange de la laveuseImmobilisationdu tuyau devidange AcheverlinstallationRéglagedelaplombdelalaveuse RemarquesCaractéristiques ET Avantages Miseenmarchedelalaveuse Utilisation DE LA LaveuseUtilisation dudétergentapproprié Premier programme de lavage sans linge à laverChoix du détergent approprié UtilisationdudistributeurPour remplir les compartiments du distributeur Pour commencer le programme de lavage immédiatementModification desprogrammes etoptions TémoinslumineuxPauseouremiseenmarche Programmes Clean Washer nettoyage de la laveuse Heavy Duty service intenseWhitest Whites blancs les plus blancs Normal/Casual normal/tout-allerOptionsetmodificateurs SonsnormauxProgramme Type DE Charge Suggéré Options Disponibles GuidedelessivageChargement Conseils DE LessivageGuidepour lélimination des taches Nettoyagedelalaveuse Entretien DE LA LaveuseNettoyage du joint/soufflet de la porte Début de la procédureTuyauxdarrivéedeau Lalaveuseetses composants DépannageCodes derreur Bruit, vibrations, déséquilibreFuites deau de la laveuse Mauvaises odeurs de la laveuse FonctionnementdelalaveuseLa porte ne se déverrouille pas Fonctionnement du distributeurChangements dans la durée du programme/programme trop long Pas assez deau/pas assez de mousseTempérature de lavage/rinçage La charge est froissée, entortillée, enchevêtrée Soin des vêtementsCharge trop mouillée AuxÉtats-Unis Assistance OU ServiceAu Canada Si vous avez besoin de pièces de rechangeWhirlpool NE Prendra PAS EN Charge Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée DE Deux ANS All rights reserved

W10063560 specifications

The Whirlpool W10063560 is a highly efficient refrigerator water filter designed to enhance the quality of drinking water by reducing contaminants and ensuring a consistent supply of clean water for your family. This advanced filter is compatible with a range of Whirlpool refrigerator models, making it a versatile choice for many households.

One of the main features of the W10063560 is its ability to reduce harmful substances such as chlorine, lead, and particulates, providing you with fresher and better-tasting water. By effectively filtering out these impurities, it not only improves the taste and odor of your water but also promotes a healthier lifestyle by reducing the potential for exposure to harmful chemicals.

The installation of the W10063560 filter is straightforward, allowing users to easily replace the old filter without the need for specialized tools. The filter typically needs to be replaced every six months, depending on water quality and usage, ensuring that you always have access to purified water. An indicator light on the refrigerator may alert you when it’s time for a replacement, making maintenance hassle-free.

In addition to its filtration capabilities, the W10063560 incorporates advanced technologies that enhance its performance. The filter features a high-grade carbon block, which effectively captures small particles and impurities. This technology ensures that the water flows effortlessly while maintaining high filtration efficiency, enabling consumers to enjoy clean water without compromising water pressure.

Another characteristic of this filter is its exceptional size compatibility, which fits various Whirlpool refrigerator models equipped with a filtered water dispenser. Its compact design ensures that it does not take up unnecessary space, allowing for a seamless integration into your refrigerator’s existing configuration.

This water filter also meets stringent industry standards, making it a reliable option for ensuring safe drinking water for your family. It has been tested and certified to the standards set forth by the NSF International, verifying its effectiveness in removing certain contaminants from drinking water.

In summary, the Whirlpool W10063560 water filter is an essential accessory for any Whirlpool refrigerator, promoting the health and well-being of families by delivering clean, refreshing water. With its ease of installation, advanced filtration technologies, and compatibility with various refrigerator models, it stands out as a top choice for consumers looking to improve their water quality.