Samsung BED70W user manual Operating Instructions, tips, Overview of the Control Panel

operating Instructions, tips

OVERVIEW OF THE CONTROL PANEL

1	2	3	4	5	6	7	8	9	10
			The display window shows the estimated time remaining in the cycle after the
			Start/Pause button is pressed. The estimated time remaining may fluctuate as
			the cycle progresses.
			The Drying light will illuminate and remain lit until the cycle is complete.
	Digital Graphic		When your Dryer is in the cool-down phase, the Cooling light will illuminate.
1			When your Dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will
	Display
			illuminate.
			When the cycle is complete, “END” will appear in the display panel until the
			Dryer door is opened or Power key is pushed.
			If your Dryer is paused during a cycle, the indicator lights will blink until the
			Start/Pause button is pressed.
			To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
			press the Dry Level button. An indicator light will illuminate next to the desired
			dryness level.
2	Dry Level		Press the button repeatedly to scroll through the settings. Larger or bulkier
	Selection Button		loads may require the More Dry setting for complete dryness.
			The Less Dry setting is best suited for lightweight fabrics or for leaving some
			moisture in the clothing at the end of the cycle.
			Use for items that lay flat or hang to dry.
			To select the correct temperature for the load, press the Temp button.
			An indicator light will illuminate next to the desired temperature. Press the
			button repeatedly to scroll through the settings.
3	Temp Selection		High – For sturdy cottons or those labeled Tumble Dry.
	Button		Medium – For permanent press, synthetics, lightweight cottons, or items
			labeled Tumble Dry Medium.
			Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
			Extra Low – Provides the lowest heated dry temperature possible.
			When using Manual Dry cycles, time can be adjusted by pressing the time
4	Time Selection		selection button.
	Button		During the Sensory Dry cycle, the time light indicator is off because exact

drying times are determined by fluctuating humidity levels.

18_ Operating Instructions, Tips

BED70W-02486B_EN.indd 18

2008-01-09 ¿ÀÈÄ 6:53:21