Electrolux 1271 VI How to dry, Automatic washing and drying, Drying only, NON-STOP programme

Page 31

How to dry

Drying only

Warning! Do not exceed the maximum laundry loads:

-2.25 kg for linen and cottons

-1.5 kg for easy-cares.

The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe.

Depress the ON/OFF button to switch the machine on.

Select the drying programme (for cotton or easy-cares).

Depress the DRYING TIME button until the time you want appears in the display.

Press the START/PAUSE button to start the programme.

DRYING

TIME

At the end of the cycle, turn the programme selector dial to RESET and press the ON/OFF button again to switch the appliance off.

Remove the laundry.

Automatic washing and drying

(NON-STOP programme)

Warning! For NON-STOP programmes, it is also essential not to exceed the maximum load sizes of 2.25 kg for cotton and 1.5 kg for easy-cares.

Load the laundry.

Add detergent and additive.

Switch the machine on by depressing the ON/OFF button.

Select the wash programme.

Select eventually the required options by means of the relevant buttons. If possible, do not select a spin speed lower than that proposed by the appliance to avoid a too long drying time so saving energy.

Select the drying time.

Start the programme by depressing the START/PAUSE button.

At the end of the programme, turn the selector dial to RESET and press the ON/OFF button again to switch the machine off.

Remove the laundry.

31

Image 31

Contents ÖKO-LAVAMAT 1271 VI Turbo Dear customer Contents Programme charts Bulding-in Technical data Service & Spare Parts Guarantee ConditionsGeneral safety Safety instructionsInstallation During use Child safetyPackaging materials DisposalMachine Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonON/OFF button Mains-on lightProgramme Option buttons Drying Time buttonPrewash Programme progress display DisplaySet the machine to Pause by pressing the START/PAUSE button Cancelling a programmeAltering a programme which is running Opening the door after the programme has startedBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleCotton 40 Weight of laundryTypes of fabric and care labels CottonDelicates Which detergent? Detergents and additivesTraditional Powders Which form?As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying timeAutomatic washing and drying NON-STOP programme Additional dryingAdd detergent and additive How to washSwitching the machine on Load the laundrySpin Speed button the correspond- ing light comes on Selection of the desired wash programmeSelection of the spin speed Selection of the Extra Rinse and/or Rinse Hold optionStarting the programme Selection of the Delay Start optionAt the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying onlyWash programmes Programme chartAdditional Max Duration Dry Special programmesDrying Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washWater inlet filter Drain filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E00 White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataHelp us to help you Service & Spare PartsService & Spare Parts 0990 929Customer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewTic bag and the previously removed screw InstallationUnpacking Carefully slide out the right poly- thene bagCarefully level by screwing PositioningLevelling Set the machineWater drainage Water inlet cold water connection onlyDo not connect to a hot water supply Electrical connections Interest of the environmentPermanent connection Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorSee Fig. H Drill four fixing holes see Fig. GBuilding-in