Electrolux 1271 VI manual Tips for environmental protection

Page 9

Tips for environmental protection

To save water, energy and to help protect the environment, we recommend that you follow these tips:

Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).

Use the energy saving programme when washing normally soiled garments.

The machine works more economically if it is fully loaded (for both washing and drying cycles).

When small loads are washed, use only half to two thirds of the rec- ommended amount of detergent.

The machine will consume less energy if the laundry is adequately spun before being dried.

With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.

9

Image 9
Contents ÖKO-LAVAMAT 1271 VI Turbo Dear customer Contents Programme charts Bulding-in Technical data Service & Spare Parts Guarantee ConditionsSafety instructions General safetyInstallation During use Child safetyDisposal Packaging materialsMachine Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelON/OFF button Delay Start buttonMains-on light START/PAUSE buttonProgramme Option buttons Drying Time buttonPrewash Programme progress display DisplayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Set the machine to Pause by pressing the START/PAUSE buttonBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Weight of laundryCotton Cotton 40Delicates Which detergent? Detergents and additivesTraditional Powders Which form?Load Preparing the drying cycleGarments not suitable for drying As a dryer, the machine works on the condensation principleDuration of the drying cycle Drying symbols on garment labelsModification of the drying time Fibre residueAutomatic washing and drying NON-STOP programme Additional dryingSwitching the machine on How to washLoad the laundry Add detergent and additiveSelection of the spin speed Selection of the desired wash programmeSelection of the Extra Rinse and/or Rinse Hold option Spin Speed button the correspond- ing light comes onStarting the programme Selection of the Delay Start optionAt the end of the programme Automatic washing and drying How to dryDrying only NON-STOP programmeWash programmes Programme chartAdditional Max Duration Dry Special programmesDrying Periodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerWater inlet filter Drain filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E00 If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts0990 929 Help us to help youCustomer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationCarefully slide out the right poly- thene bag Tic bag and the previously removed screwLevelling PositioningSet the machine Carefully level by screwingWater inlet cold water connection only Water drainageDo not connect to a hot water supply Electrical connections Interest of the environmentPermanent connection Building-in Preparation and assembly of the doorDoor HingesCounter-magnet Mounting the doorSee Fig. H Drill four fixing holes see Fig. GBuilding-in