Electrolux 1271 VI manual Building-in, Preparation and assembly of the door, Door, Hinges

Building-in

This appliance has been designed to be built into the kitchen furniture. The recess should have the dimen- sions shown in picture A.

	176,5
818	416

A

515

8

165

596

120 541

160

90 490

600
	.
600	min

820 min

195

Preparation and assembly of the door

The machine is originally pre-
arranged for the assembly of a		6
door opening from right to left.					4
In this case it is sufficient to screw
in the hinges (1) and the counter-
magnet (6) provided with the appli-		1	2	7	5
ance, at the right level (Fig. B).		1
a) Door				3
The dimensions of the door should		23		8
be:		B
- width	595-598 mm
- thickness	16-22 mm

The height (C-Fig. C) depends on the height of the adjacent furniture's base.

b) Hinges	35 Ø 12.5-14 depth
To mount the hinges it is necessary to	16	22	B
	-
drill two holes (dia. 35 mm, depth
12.5-14 mm) on the inner side of the			416 C
door. The distance between the holes
hobs fixing centres must be 416 mm.

The distance (B) from upper edge of the door to the centre of the hole depends on the adjacent furniture's

dimensions.C

22+1,5

-598 595

The required dimensions are given in the picture C.

The hinges will be fixed to the door by means of screws for wood (2-Fig. B) supplied with the appliance.

55