Electrolux 1271 VI manual Prewash

Page 15

Description of the appliance

PREWASH

The machine performs a prewash cycle at 40°C max. The prewash cycle ends with a short spin in programmes for Cotton and Easy-cares, and with emptying of the water only for Delicates.

This option is not available with the wool programme. For use when washing heavily soiled laundry.

Important: the STAIN, PREWASH and QUICK WASH options cannot be

selected together: one automatically disables the others.

EXTRA RINSE

Can be used with all programmes except the wool programme. The machine performs 4 rinses instead of 3.

This option is recommended for people who are allergic to detergents and in areas where the water is very soft.

RINSE HOLD

When this button is pressed, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the corresponding pilot light on the programme progress display flashes to indicate that the water must be emptied out.

To empty out water:

press the START/PAUSE button: after emptying, the machine performs the spin cycle required for the type of wash selected;

select the PUMP OUT programme to empty out the water without spinning.

Warning! The programme selector dial must be turned first to RESET and then to programme “PUMP OUT”.

This option can also be selected for the wool programme: the last rinse water is emptied out but the machine does not spin.

If the water is not emptied out, the machine automatically empties itself after 18 hours.

The RINSE HOLD option cannot be selected for the automatic WASHING & DRYING programme.

SPIN SPEED

Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme.

The maximum spin speed for cotton is 1200 rpm, for easy-cares and wool 900 rpm and for delicates 700 rpm.

15

Image 15
Contents ÖKO-LAVAMAT 1271 VI Turbo Dear customer Contents Programme charts Bulding-in Technical data Service & Spare Parts Guarantee ConditionsSafety instructions General safetyInstallation During use Child safetyDisposal Packaging materialsMachine Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonON/OFF button Mains-on lightProgramme Option buttons Drying Time buttonPrewash Programme progress display DisplaySet the machine to Pause by pressing the START/PAUSE button Cancelling a programmeAltering a programme which is running Opening the door after the programme has startedBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleCotton 40 Weight of laundryTypes of fabric and care labels CottonDelicates Which detergent? Detergents and additivesTraditional Powders Which form?As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying timeAutomatic washing and drying NON-STOP programme Additional dryingAdd detergent and additive How to washSwitching the machine on Load the laundrySpin Speed button the correspond- ing light comes on Selection of the desired wash programmeSelection of the spin speed Selection of the Extra Rinse and/or Rinse Hold optionStarting the programme Selection of the Delay Start optionAt the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying onlyWash programmes Programme chartAdditional Max Duration Dry Special programmesDrying Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washWater inlet filter Drain filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E00 White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataHelp us to help you Service & Spare PartsService & Spare Parts 0990 929Customer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewTic bag and the previously removed screw InstallationUnpacking Carefully slide out the right poly- thene bagCarefully level by screwing PositioningLevelling Set the machineWater inlet cold water connection only Water drainageDo not connect to a hot water supply Electrical connections Interest of the environmentPermanent connection Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorSee Fig. H Drill four fixing holes see Fig. GBuilding-in