Electrolux 1271 VI manual E00

Page 41

Something not working?

Problem

 

Possible cause

 

Solution

 

 

 

 

 

Spinning starts late or the machine does not spin

The machine will not dry or the laundry is not dry enough

The unbalance detection

If the laundry is not evenly

device that prevents

distributed inside the drum

excessive vibration during

at the beginning of the

spinning has cut in.

spin cycle, the machine

 

detects this and tries to

 

redistribute it more evenly

 

by means of a few drum

 

rotations.

 

Only when the laundry is

 

more evenly distributed

 

will the spin cycle be

 

performed, at a lower speed,

 

if the laundry is not evenly

 

distributed.

 

If, after about 15 minutes,

 

the laundry is still tangled,

 

the machine will not spin.

 

Therefore, if the laundry is

 

still wet at the end of the

 

cycle, it is advisable to

 

redistribute it manually

 

inside the drum and to

 

select the spin programme

 

again.

 

 

The water tap is not open

Open the water tap.

(E00).

 

The drain filter is clogged.

Clean the filter.

The drying time has not

Select the drying time.

been selected.

 

An appropriate drying time

Select the appropriate

has not been chosen.

drying time suitable for the

 

required degree of drying,

 

according to the type of

 

fabric (cottons or easy-cares).

There is too much laundry

Reduce the load.

inside the appliance.

 

 

 

41

Image 41
Contents ÖKO-LAVAMAT 1271 VI Turbo Dear customer Contents Programme charts Bulding-in Technical data Service & Spare Parts Guarantee ConditionsInstallation Safety instructionsGeneral safety During use Child safetyMachine DisposalPackaging materials Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelON/OFF button Delay Start buttonMains-on light START/PAUSE buttonProgramme Option buttons Drying Time buttonPrewash Programme progress display DisplayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Set the machine to Pause by pressing the START/PAUSE buttonBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Weight of laundryCotton Cotton 40Delicates Which detergent? Detergents and additivesTraditional Powders Which form?Load Preparing the drying cycleGarments not suitable for drying As a dryer, the machine works on the condensation principleDuration of the drying cycle Drying symbols on garment labelsModification of the drying time Fibre residueAutomatic washing and drying NON-STOP programme Additional dryingSwitching the machine on How to washLoad the laundry Add detergent and additiveSelection of the spin speed Selection of the desired wash programmeSelection of the Extra Rinse and/or Rinse Hold option Spin Speed button the correspond- ing light comes onStarting the programme Selection of the Delay Start optionAt the end of the programme Automatic washing and drying How to dryDrying only NON-STOP programmeWash programmes Programme chartAdditional Max Duration Dry Special programmesDrying Periodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerWater inlet filter Drain filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E00 If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts0990 929 Help us to help youCustomer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationCarefully slide out the right poly- thene bag Tic bag and the previously removed screwLevelling PositioningSet the machine Carefully level by screwingDo not connect to a hot water supply Water inlet cold water connection onlyWater drainage Electrical connections Interest of the environmentPermanent connection Building-in Preparation and assembly of the doorDoor HingesCounter-magnet Mounting the doorSee Fig. H Drill four fixing holes see Fig. GBuilding-in