Electrolux 1271 VI manual Instructions for installation and electrical connection

Page 48

Instructions for installation and electrical connection

Safety instructions for the installer

•This appliance is heavy, care should be taken when moving it.

•When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

•All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph.

•Any electrical work required to install this appliance must be carried out by a qualified electrician.

•Any plumbing work required to install this appliance must be carried out by a qualified plumber.

•After having installed the machine, check that it is not standing on its electrical supply cable.

•If the appliance is placed on a carpeted floor, ensure that air can cir- culate freely between the adjustable feet and the floor.

•The installation should comply with local water authority and build- ing regulations requirements.

•Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

48

Image 48

Contents ÖKO-LAVAMAT 1271 VI Turbo Dear customer Contents Programme charts Technical data Service & Spare Parts Guarantee Conditions Bulding-inSafety instructions General safetyInstallation Child safety During useDisposal Packaging materialsMachine Tips for environmental protection Main features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialDelay Start button ON/OFF buttonMains-on light START/PAUSE buttonDrying Time button Programme Option buttonsPrewash Display Programme progress displayCancelling a programme Altering a programme which is runningOpening the door after the programme has started Set the machine to Pause by pressing the START/PAUSE buttonDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryWeight of laundry Types of fabric and care labelsCotton Cotton 40Delicates Detergents and additives Which detergent?Which form? Traditional PowdersPreparing the drying cycle LoadGarments not suitable for drying As a dryer, the machine works on the condensation principleDrying symbols on garment labels Duration of the drying cycleModification of the drying time Fibre residueAdditional drying Automatic washing and drying NON-STOP programmeHow to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the spin speedSelection of the Extra Rinse and/or Rinse Hold option Spin Speed button the correspond- ing light comes onSelection of the Delay Start option Starting the programmeAt the end of the programme How to dry Automatic washing and dryingDrying only NON-STOP programmeProgramme chart Wash programmesSpecial programmes Additional Max Duration DryDrying Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawerDrain filter Water inlet filterFrost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been E00 Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService & Spare Parts Service & Spare Parts0990 929 Help us to help youCustomer care Guarantee Conditions European Guarantee Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingCarefully slide out the right poly- thene bag Tic bag and the previously removed screwPositioning LevellingSet the machine Carefully level by screwingWater inlet cold water connection only Water drainageDo not connect to a hot water supply Interest of the environment Electrical connectionsPermanent connection Preparation and assembly of the door Building-inDoor HingesMounting the door Counter-magnetDrill four fixing holes see Fig. G See Fig. HBuilding-in