Electrolux 16850A user manual Programme option buttons

Page 11

Daily use 11

Select the required programme by turning the programme selector dial (1)

You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g. water level, drum movement, number of rin- ses) and the washing temperature according to the type of laundry.

By selecting a programme, the programme progress indicator symbols and the symbol corresponding to the drying degree allowed by the set programme appear on the display. The pilot light of button 7 starts blinking and the display shows the duration of the se- lected programme.

The selector dial can be turned either clockwise or anticlockwise.

Position corresponds to a cold wash, the position to Reset programme/ Switching OFF of the machine.

At the end of the programme the selector dial must be turned to position , to switch the machine off.

If you turn the programme selector dial to another programme when the machine is working, the yellow pilot light of button 7 will blink 3 times and the message Err is dis- played on the display to indicate a wrong selection. The machine will not perform the new selected programme.

Select the spin speed, NIGHT CYCLE or RINSE HOLD option (button 2)

When the required programme has been selected, your appliance automatically proposes the maximum spin speed provided for that programme.

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washer-dryer.

RINSE HOLD: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. At the end of the programme, a blinking and the RINSE HOLD symbol appear on the display, the DOOR symbol (door locked) remains lit and the pilot light of button 7 goes off. The door is locked to indicate that the water must be emptied out.

NIGHT CYCLE: by selecting this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed, this wash- ing cycle is very quiet and it can be selected at night or in times with a more economical power rate. In some programmes the rinses will be performed with more water. At the end of the programme, a blinking and the RINSE HOLD symbol appear on the display, the DOOR symbol remains lit and the pilot light of button 7 goes off. The door is locked to indicate that the water must be emptied out.

RINSE HOLD or NIGHT CYCLE option cannot be selected with a NON-STOP pro- gramme (see Drying section). To empty out the water, please read chapter «At the end of the programme».

Programme option buttons

Depending on the programme, different functions can be combined.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Lavamat 16850A Contents Safety information Safety InformationGeneral safety Use InstallationProduct description Child SafetyProduct Description Detergent dispenser drawer Control PanelDisplay Symbols on the control panelSpin Speed indicator, Rinse Hold , Night Cycle symbols SymbolsPage Personalization Acoustic signalsChild safety lock First USELoad the laundry Daily USEProgramme option buttons Daily option Prewash optionStain option Sensitive optionSelect the START/PAUSE button Select the Delay Start buttonSuper Quick option Extra Rinse option additional rinseOpening the door after the programme has started Cancelling a programmeAltering an option or a running programme Interrupting a programmeDrying only USE DryingAutomatic washing and drying NON-STOP programme Washing Programmes Washing programmes Main wash Rinses Short spin at 1200 rpm Max. load 3 kg Draining of water Max. load 7 kgWater left in the tub SpunDrying Programmes Drying ProgrammesAutomatic Programmes Timed ProgrammesRemoving stains Helpful Hints and TipsSorting out the laundry Before loading the laundryPreparing the drying cycle Drying HintsQuantity of detergent to be used Degrees of water hardnessAdditional drying Garment labelsDrying cycle duration Descaling Care and CleaningMaintenance wash External cleaningWashing-in chamber, with a brush Washing drumDoor seal Drain pumpPage Cleaning the water inlet filters What to do if… Frost precautionsWhat to do IF… Emergency emptying outCancel the delay start Insert the plug into the power socketThere is no power at the socket Delay start has been selectedWait until the symbol 9.4 has gone off Clean the drain filterSpinning phases has been selected Ter cleaning actionDrum Redistribute the laundry What to do if…Removed AnceConsumption Values Technical DataTechnical data Unpacking InstallationPage An insulating panel covered with aluminium foil InstallationPositioning and levelling This appliance must be connected to a cold water supply Water inletDrain hose must not be kinked Water-stop deviceWater drainage End of the drain hose can be positioned in three waysEnvironment Concerns Electrical ConnectionEcological hints Packaging materials132 940 240 00
Top Page Image Contents