Electrolux 16850A user manual

Page 26

26Care and cleaning

3.Open the pump door.

4.Pull flap forward to remove.

5.Place a container close to the pump to collect any spillage.

6.Pull out the emergency emptying hose, place it in the container and remove its cap.

7.When no more water comes out, un- screw the pump cover by turning it an- ti-clockwise and remove the filter. Use pliers, if necessary. Always keep a rag nearby to dry up any water spillages when removing the cover.

Clean the filter under a tap, to remove any traces of fluff.

8.Remove foreign bodies and fluff from the filter seat and from the pump im- peller.

9.Check carefully whether the pump im- peller rotates (it rotates jerkily). If it doesn’t rotate, please contact your Service Centre.

10.Put the cap back on the emergency emptying hose and place the latter back in its seat.

Image 26

Contents Lavamat 16850A Contents Safety information Safety InformationGeneral safety Installation UseProduct description Child SafetyProduct Description Control Panel Detergent dispenser drawerSymbols Symbols on the control panelSpin Speed indicator, Rinse Hold , Night Cycle symbols DisplayPage First USE Acoustic signalsChild safety lock PersonalizationDaily USE Load the laundryProgramme option buttons Sensitive option Prewash optionStain option Daily optionExtra Rinse option additional rinse Select the Delay Start buttonSuper Quick option Select the START/PAUSE buttonInterrupting a programme Cancelling a programmeAltering an option or a running programme Opening the door after the programme has startedUSE Drying Drying onlyAutomatic washing and drying NON-STOP programme Washing Programmes Washing programmes Spun Draining of water Max. load 7 kgWater left in the tub Main wash Rinses Short spin at 1200 rpm Max. load 3 kgTimed Programmes Drying ProgrammesAutomatic Programmes Drying ProgrammesBefore loading the laundry Helpful Hints and TipsSorting out the laundry Removing stainsDegrees of water hardness Drying HintsQuantity of detergent to be used Preparing the drying cycleAdditional drying Garment labelsDrying cycle duration External cleaning Care and CleaningMaintenance wash DescalingDrain pump Washing drumDoor seal Washing-in chamber, with a brushPage Cleaning the water inlet filters Emergency emptying out Frost precautionsWhat to do IF… What to do if…Delay start has been selected Insert the plug into the power socketThere is no power at the socket Cancel the delay startTer cleaning action Clean the drain filterSpinning phases has been selected Wait until the symbol 9.4 has gone offAnce What to do if…Removed Drum Redistribute the laundryConsumption Values Technical DataTechnical data Installation UnpackingPage An insulating panel covered with aluminium foil InstallationPositioning and levelling Water inlet This appliance must be connected to a cold water supplyEnd of the drain hose can be positioned in three ways Water-stop deviceWater drainage Drain hose must not be kinkedElectrical Connection Environment ConcernsPackaging materials Ecological hints132 940 240 00